Reviews Robot Servo Control Board

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi

  • These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
  • Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
  • For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
  • Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
  • Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check Stock

Uninterruptible Jetson Nano Power Supply UPS Power Module for Stable 5V Power Output with Multi Protection Circuits Designed for Jetson Nano Developer Kit @XYGStudy

  • 【Based on ROS Programmable Project Professional Kit】 Transbot uses the Rviz, Movelt, and Qt toolboxes in the robot operating system to realize the joint control of the robotic arm Movelt simulation and the real machine. You can also operate at any time on the 7-inch screen（★Note: check the version you ordered carefully）.
  • 【RTAB-VSLAM 3D Visual Mapping Navigation】Astra Pro 3D Camera provided by version III supports 3D mapping navigation technology (rtab) containing pure vision and visual radar fusion. Transbot robot can navigate,avoid obstacles and global relocation in the 3D map, and quickly obtain image data such as camera depth map, color map, and skeleton through the corresponding API., based on the image related KCF filter algorithm, any follow target in the image can be selected. Beginning of the 3D world.
  • 【AI Function Combination】The robot integrates a wealth of AI functions, such as intelligent patrol, radar guard and tracking,3-DOF flexible grasping of manipulator, fixed-point navigation, automatic driving, color recognition and tracking, AR tag recognition and reality enhancement, visual image beautification, face detection, lidar mapping n....
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

BETU 2Pack 25KG High Torque RC Servo，Waterproof servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn（270°）

  • 2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell..
  • The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
  • Waterproof servo, Full metal gear, Less noise, light weight, Running degree 270°.
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

OSOYOO Model 3 Robot Car DIY Starter Kit for Arduino | Remote Control App Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical Coding for Teens Adults

  • SIMPLE, EDUCATIONAL, FUN PROJECT — Control your OSOYOO Robot Car V2.0 for Arduino System by Android and iOS App, allowing many additional functions such as imitation driving, auto driving . This intelligent, new technology supports various projects such as line tracking, object motion following, obstacle avoidance and gravity sensing control..
  • PROGRAMMABLE STARTER KIT FOR TEENS, ADULTS AND PROFESSIONALS – The OSOYOO Robot Car Kit V2.0 is fully compatible with Arduino R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators and get hands-on programming, coding, electronics and robotics experience.
  • THE BEST VALUE PACK — This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board for UNO, USB Cable, Motor shield for UNO, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, Tracking Modules, Buzzer Sensor Module, Infrared IR Remote, & Receiver, 9V Battery Box, Voltage Meter, Acrylic Car Chassis, Motors & Wheels.
Check Stock

BETU 35KG Coreless High Torque Servo，Waterproof Servo Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car, Metal Gear Servo with 25T Servo Horn（180°）

  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arm..
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock