Reviews Resistive Component - BestBuyersPro.com

Orbit Clear Comfort Non-Programmable 83501 Thermostat

Easy to use - digital, push-button operation.
High-capacity electronic thermostat (up to 3000W @ 240V).
Compatible with line volt heating only (240V) including electric baseboards, convectors, radiant ceilings and fan-forced heaters.
TRIAC thermostat - Accuracy of 0. 15°C for maximum savings and comfort.
2-Wire installation includes mounting hardware.
100% silent switching - no clicking noise.
Power: Maximum load: 3000W @240V, 12. 5A resistive Minimum load: 500W @240V, 2A resistive.

Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
Battery-free backup means no re-programming your schedule after power outage.
Timeless design complements virtually any room.
Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.

Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
Battery-free backup means no re-programming your schedule after power outage.
Timeless design complements virtually any room.
Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.

Ideal for pool pumps. Use the TI040 to run your pool pump for 16-hours a day instead of 24 and recover the cost of the timer in as little as a year or two.
Three-operating modes: Manual (conventional on and off switch), Automatic, Temporary bypass.
Connection: terminals for No.14 to No.10 AWG wire, multi switch (3-way) compatible, 1.5 HP 120-Volt 30-Ampere (resistive), 10-Ampere (ballast), 2 HP 240-Volt 30-Ampere (resistive), 10-Ampere (ballast).
Dimensions (height by width by depth): 9.4-Inch by 7.2-Inch by 3.8-Inch.

This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
The resolution of 3.5 inch touch screen can be adjusted by software.
The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).

...e furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).

... furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 200mm (7.87”) and thickness 5mm (0.2”)..

Easy to use and install for home temperature control of electric heating systems.
TRIAC switching for accurate temperature control of +/- 1 degrees Fahrenheit.
Silent operation with no annoying clicking noise, making it ideal for all rooms including bedrooms.
Compatible with electric baseboards (120-240 volt) convectors and radiant ceiling applications with minimum load of 0. 83 A (resistive only) 200 W @ 240 VAC or 100 W @ 120 VAC and a maximum load of 8. 3 A (resistive only) 2000 W @ 240 VAC or 1000 W at 120 VAC.
LCD display, on-screen heating command indicator.