Reviews Resin Bonding Discs

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock

West System 209-SB Extra Slow Hardener

  • 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
  • USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
  • PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check Stock

60Pcs Cutting Wheel Set for Rotary Tool - JUEMEL 545 Diamond Cutting Wheel, HSS Circular Saw Blades, Resin Cutting Disc with Mandrels for Wood Glass Plastic Stone Metal

  • 【3 Types Mixed Cutting Wheel Set】: Goxawee cutting disc set provide 3 types cutting wheels, including diamond cutting discs, HSS cutting saw blades, and resin cutting wheels. It is an ideal for rotary tool’s beginners to learn how to use different wheels in DIY projects..
  • 【Multi-purpose Cutting Discs】: The resin cut-off wheels set is suitable for all kinds of metal, soft alloy, aluminum, diamond cutting wheel set for stone, ceramic, glass, jade stone, HSS cutting disc for wood, plastic, PVC pipes. Can cover the different purpose for DIYers..
  • 【High Quality Discs】:This disc set is made by premium material, it has high working efficiency, and perfect cutting effect, also can meet requirements of DIY enthusiasts..
  • 【Great Disc Set for DIY】: The 1/8" (3mm / 3.3mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools, it is easy to use and can change the accessories fast..
  • 【Package Details】: 53Pcs Rotary tool mini cutting discs sets include 6 × HSS wood cutting saw blade discs, 10 × Diamond cutting discs wheels, 20 × Resin Cutting Wheel Cut-off Discs, 6 x Abrasive Stone, 3 x Rotary Burr & 7 × Mandrels..
Check Stock

Gemzeez The Original DIY Temporary Tooth Gemz Official Starter Kit TikTok The Kaplan Twins

  • THE ORIGINAL TOOTH GEM KIT: Enjoy the official Gemzeez Starter Kit! Unlike our competitors, we supply enough materials for multiple uses! Gemzeez is....
  • Created with the help of Dentists! Dr. Alan Kaplan DDS, has been practicing Dentistry since 1987. Our Cleansing Gel and UV Bonding Resin is Dental....
  • Fun and easy application! We use genuine Swarovski Crystals to give you your best sparkle! Swarovski crystals are non-toxic and lead free!.
  • Our NEW and IMPROVED 2 Step Cleansing Gel, and UV Bonding Resin formulas ensure Gemzeez will last up to 2 weeks, or even longer! Gemzeez is the most....
  • Kit Includes: 6 Small Clear Swarovski Crystals, 4 Microbrush Applicators, Gemz Picker, Cleansing Gel, Dental Grade UV Bonding Resin, 1 Mini UV Light,....
Check Stock

Zorfeter 20 PCS 9-Inch Sanding Disc, 100 Grit NO-Hole Aluminum Oxide Round Flocking Sandpaper for Drywall Sander, Self Stick

  • Benchmark Abrasives 4-1/2" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Generic 3.35Inch Wood Shaping Disc 78 Inch Bore Carving Compatible with DeWalt Bosch Milwaukee Makita, Grinding for Sanding Polishing (Silver Arc Type)

  • Benchmark Abrasives 5" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Benchmark Abrasives 7\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 60 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

DIY Tooth Gem Kit, Teeth Gems Kit with Glue and Light, 20 Pieces Crystals Teeth Jewelry Starter kit, Tooth Jewelry Gems Kit, Teeth Diamonds Jewel Kit

  • Complete DIY kit: The tooth gem kit with curing Light and Glue, including Cotton Rolls, Bonding Resin, Gems, and UV Lights, allowing you to DIY immediately after receiving the package, the most reliable and affordable DIY kit..
  • Simple And Fun Process: The easiest and safest DIY, so that customers who are not good at handwork can quickly get started..
  • Reliable Materials: using the latest resin glue, the most reliable teeth diamonds, ensure tooth gems will last up to 3 weeks, or even longer. The Quality Is Guaranteed, it does not affect daily life, and you can brush your teeth or eat without falling out (because our teeth have different textures, shapes, and sizes, results may vary).
  • Sufficient Materials And Diverse Functions: Provides bonding resin that can bond more than 20 diamonds, high-quality UV LED light can not only cure dental drills but also can be used for nail jewels..
  • Kit includes 1 x Gem Suit, 1 x Gems Picker, 1 x UV Bonding Resin, 1 x UV Light, and 6 x Cotton Rolls..
Check Stock

Benchmark Abrasives 5\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 36 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor aluminum oxide resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of aluminum oxide grain that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Dremel EZ728-01 EZ Lock Rotary Tool Cutting Discs Accessory Kit, Cut-Off Wheels for Plastic, Metal, and Thin Cuts, 11- Piece Assorted Accessories Set

  • ★ Package Details: JUEMEL Rotary tool cutting discs set include 30pcs mini resin cutting discs, 10pcs resin cutting discs, 10pcs 545 diamond cutting wheels, 5pcs HSS wood cutting saw blade and 5 * mandrels..
  • ★ Ideal Tool for DIY: JUEMEL Rotary Cut-Off Wheel Kit has three assorted cutting discs set for needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • ★ Compatibility: 1/8" (3mm / 3.2mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools. It is easy to install and replace..
  • ★ High Quality: High working efficiency, perfect cutting effect. JUEMEL rotary cutting wheels tool is made of high-quality steels, diamond particles, and fiberglass-reinforced for strength and durability..
  • ★ ATTENTION: For your safety, please must wear gloves and goggles. It may become scorching hot when using diamond cutting wheels. Please add some water to keep it cool..
Check Stock