Reviews Abrasives Discs

Coceca 120pcs Orbital Sandpaper 5 Inches 1000 1200 1500 2000 3000 High Grit 8 Hole Fine Grit Orbit Sanding Discs Hook and Loop for Power Random Sander

  • PACKAGE CONTAINS: 24 pack each of 1000/1200/1500/2000/3000 high grit 5 inches 8 holes hook and loop orbital sanding discs, 120pcs fine grit sanding discs in total..
  • DUSTLESS: Pre-punched with 8 holes for efficient dust extraction..
  • PERFECT ADHESION: The sanding discs are made from high quality alumina abrasives, durable and antistatic. The discs are exactly and tightly fit and adhered with sanders and do not need to worry about falling off..
  • APPLICATION: Widely used in the grinding and polishing of metal and non-metal, wood, rubber, leather, plastic, stone, glass and other materials..
  • COMPATIBILITY: Our orbital sandpapers fit universal orbital sander. These Sanding Discs are suitable for the 8-hole side with a hook and loop sanding pad..
Check Stock

Generic 3.35Inch Wood Shaping Disc 78 Inch Bore Carving Compatible with DeWalt Bosch Milwaukee Makita, Grinding for Sanding Polishing (Silver Arc Type)

  • Benchmark Abrasives 5" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Benchmark Abrasives 7\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 60 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 5\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 36 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor aluminum oxide resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of aluminum oxide grain that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

3 Inch Roloc Quick Change Discs 28PCS Set Roll Lock Sanding Discs + Surface Conditioning Disc + Flap Disc + Felt Disc + 1/4 Holder for Die Grinder Surface Prep Polish Finish Burr Rust Paint Removal

  • ...ncludes assort grit zirconium corundum sanding discs & flap discs, corse to fine surface conditioning discs, strip disc and felt polishing disc, satisfying your multiple requirements from grinding, paint & rust removal, polishing and finishing..
  • HIGH PERFORMANCE & LONG LASTING: Die grinder discs are made by superior abrasives with cloth backing, providing you a fast grinding force, great wear resistance and long lasting performance, deal with almost all surface easily..
  • SAFTY DESIGN & QUICK CHANGE: Safety torque spiral design, easy and fast to install and change disc, save 50% of the time, improve work efficiency..
  • WIDELY USED: Roloc sanding discs kit ideal for stainless steel, standard or alloyed steel, non-ferrous materials and alloys, plastic, fiberglass, wood and car, for grinding, cleaning, finishing, deburring and rust paint removal applications. Suitable for power drill, mold/air grinding machines and other rotating tools..
  • TOTAL 28PCS PACKING: This roloc quick change disc set includes: 12 x assort sanding discs.
  • 3 x coarse surface conditioning discs(yellow).
  • 3 x medium surface conditioning discs(Red).
  • 3 x fine surface conditioning discs(Blue).
Check Stock

10PCS Strip Discs Stripping Wheel for Angle Grinder 4-1/2\ x 7/8\ Fit Angle Grinder Clean,Paint Stripping Disc,Abrasive Quick Abrasive Disc Cleanemove Paint Rust and Oxidation

  • MATCH SIZE: Paint stripper 4-1/2" x 7/8" with 10 pack for use on metal, fiberglass,wood,concrete..
  • MATERIAL: which is the best material for stirp discs better than any product.Abrasives made of premium silicone carbide grains. Extra coarse grade silicon carbide provide consistent finishing results..
  • Paint remover improved nylon web fibers . Blue clean and strip discs than black clean and strip discs. even works in wet areas..
  • MAX PERFORMANCE: new premium discs are great for removing rust, paint, oxidation, weld lines, varnish, surface contaminants， Scaling .For use on wood, metal and fiberglass..
  • FIT YOUR TOOLS: 4 1/2 grinding wheels fit for 4.5" Angle Grinder - .Easy Strip and Clean discs are great for auto body shops needing to remove paint and under coating while still protecting the vehicle body..
Check Stock

LotFancy 14PCS 4-1/2 Flap Discs and Cutting Wheels Set - 40 60 80 120 Grit Assorted Zirconia Alumina Sanding Grinding Wheels Type #27 Metal Cut Off Wheels for Angle Grinders

  • This sanding wheels pack includes 8 flap discs of multiple grit: 40 60 80 120 grit and 6 cutting discs, satisfying your requirements from all your cutting, blending, sanding and finishing requirements.
  • Each Disc is bonded with fiberglass backing to absorb tool vibration and offer additional durability and reinforcement.
  • Zirconia Alumina abrasives feature a superior cut rate and service life to aluminum oxide abrasives.
  • They are durable, aggressive cut, good abrasion resistance, anti-static and anti-clogging.
  • Wide Application: Flap Disc is widely used for rust, paint, ferrous metals, stainless steel, non-ferrous metals, wood and plastics.
  • Thin Cutting Wheel is designed for fast burr free cutting, quickly and effortlessly cutting through All Metal, Steel and Stainless Steel.
  • 4-1/2" Diameter with 7/8" Arbor, 13300RPM maximum speed, fits most 4.5 Inch Angle Grinder, such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more.
Check Stock

Benchmark Abrasives 4-1/2 Type 27 Surface Conditioning Angle Grinder Flap Discs for Blending Grinding Sanding Polishing 7/8 Arbor 5 Pack - Fine Grit

  • Benchmark Abrasives 4-1/2" flap discs with 7/8" arbor are ideal for blending, polishing, finishing, deburring, deflashing, light grinding, stock removal, etc..
  • These Type 27 flap discs are made with the highest quality non-woven, open nylon webbing, filled with premium abrasive grains. Perfect for grinding flat surfaces and outside edges..
  • Designed to meet industrial standards, our high quality flap discs are recommended to be used with right angle grinders. For better results optimal RPM should be 4,000-5,000 during operations..
  • Efficient flap discs are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Coceca 80pcs Orbit Sander Sandpaper 5 Inch 8 Hole Orbital Sanding Discs Assorted 40 60 80 100 150 180 240 320 Grits for Power Random Orbit Sanders

  • This premium package includes: 80 sheets of Sanding Discs in 8 different grades, 40/60/80/100/150/180/240/320/ grit, 10 sheets each..
  • Sanding Discs are 5 inches in diameter and are suitable for use in the Random Orbital Sander..
  • Backing: hook and loop, easy and quick to stick, sturdy, durable and practical.
  • Made from high-quality alumina abrasives, Sanding Discs are durable and anti-static, ideal for sanding and polishing..
  • Widely used in the grinding and polishing of metal and non-metal, wood, rubber, leather, plastic, stone, glass and other materials..
Check Stock

Benchmark Abrasives 4-1/2" x 7/8" Premium High-Density Jumbo Zirconia Type 29 Flap Discs for Sanding, Stock and Rust Removal, Finishing, Grinding, Deburring (50 Pack) - 60 Grit

  • Benchmark Abrasives 4.5" flap discs are ideal for surface blending, beveling, grinding, deburring, edge chamfering, finishing, stock removal, etc. on a variety of ferrous and non-ferrous materials..
  • Zirconia Flap Discs are manufactured using European zirconia cloth. The European material is superior due to its uniform particle size and premium blend of ingredients..
  • Designed to meet industrial standards, our high-quality flap discs are recommended to be used with angle grinders sized 4.5" to 5”. These Type 29 flap discs are versatile products that can be used for aggressive stock removal to surface blending..
  • Efficient flap discs are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock