Reviews Remote Data Module

Crimestopper RS7-G5 Cool Start 2-Way Remote Start System

  • Universal on all types of vehicles, especially those with larger ignition wires with high current ignition switches.
  • manual transmission operation, dome light supervision, horn honk output.
  • Rapid response 2-way and 1-way transmitters (instant lock and unlock like the factory system).
  • 2-way twin data ports to accommodate both Fortin and ADS data modules.
  • New style, 2-way transmitter with brushed aluminum and titanium finish, includes standard USB and wall charger for LCD pager.
  • includes "sidekick" non-paging remote with (2) vehicle operation.
  • LED changes color to indicate vehicle number 1 or 2.
  • Out-of-range notification on LCD pager as well as remote start run time countdown read-out.
  • real time confirmation of lock, unlock and trunk pop.
  • Trunk pop output standard, additional auxiliary outputs available with data module.
  • includes remote panic, silent lock and unlock through remote.
Check Stock

MPC (2) 4-Button 1-Way Remotes with Antenna Upgrade Kit for Fortin EVO-All & EVO-ONE - Extends Range up to 2,800 ft

  • ✅ OVERVIEW - The EVO-REMOTE-4 is a 4-Button 1-Way plug-in RF remote and antenna upgrade system for Fortin EVO-ALL or EVO-ONE "stand alone" remote start systems. Includes: (2) 4-button remotes, RFA2A antenna adapter, decoder antenna, antenna wire, and instructions..
  • ✅ FEATURES - Start or stop your engine with the push of a dedicated button from up to 2,800 feet away. Depending on vehicle and data module coverage, functions also include lock, unlock, trunk or back hatch release, and AUX channel activation..
  • ✅ INSTALLATION TYPE - The installation of this product will require only the plug-ins to an existing EVO-ALL or EVO-ONE module, no wiring connections are required. A person with basic knowledge of wiring car electronics should be able to install this product successfully..
  • ✅ IMPORTANT: This is not a full remote car starter. This is an add-on remote control kit that works with Fortin “stand-alone” remote starter systems that consist of an EVO-ALL or EVO-ONE module only and do not include a separate remote start module. If you have an EVO-ALL or EVO-ONE that was NOT purchased from MPC, you will need a FlashLink Updater to make this product work. EVO-ALL or EVO-ONE standalone systems purchased from MPC have the correct settings and the up....
Check Stock

DollaTek SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for R3 Mega with Antenna

  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega.
  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Note: This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

AOICRIE 2Pcs MCP2515 CAN Bus Module TJA1050 Receiver SPI Module for Arduino 51 MCU ARM Controller Development Board (2 PCS)

  • Support CAN V2.0B technical specification, communication rate 1Mb/S..
  • 0~8 bytes long data field, standard frame, extended frame and remote frame..
  • Module 5V DC power supply, SPI interface protocol control, 120 ohm terminating resistor, impedance matching, guaranteed drive capability, long-distance data transmission to prevent signal emissions..
  • Module size: 44mm x 28mm, centering distance of the positioning screw hole: 23mm x 38mm..
  • Operating current: typical value 5mA, standby current 1 microamperes, except for the power indicator. Working temperature: industrial grade -40 ° C to 85 ° C..
Check Stock

Crimestopper KEY-OVERRIDE-ALL Self Learning PATS Data Bypass Kit

  • Data Transponder Bypass Module For 1998 - 2011 Ford/Lincoln/Mercury/Toyota/Lexus Vehicles.
  • Compatible With Some Push-to-start Hybrid.
  • Stable from 4.5 to 25 volts, and to -40 degrees Celsius.
  • Compatible with all alarm and remote start models.
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield.
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

Fortin EVO-GMT5 Stand-Alone Add-On Remote Start Car Starter System For GMC Full Size Vehicles

  • The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and door lock interface combo module.
  • It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • 2-way Data-Link port for serial communication with compatible remote car starters and also includes analog plug for compatibility with non 2-way....
  • Multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • For full functionality, installation manual, and to see if this module is compatible with your vehicle please go to Fortin's web site.
Check Stock