Reviews Temperature Module

DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
  • Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
  • Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
  • Measure the temperature directly in water or soil.
  • DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.
Check Stock

ICQUANZX 2pcs DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
  • Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
  • Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
  • Measure the temperature directly in water or soil.
  • DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • ...age regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, no worry about safety and bring you more convenience.
  • Operating junction temperature range: -40 to 125°C, welding temperature (25 seconds): 265°C, storage temperature: - 65~150°C.
Check Stock

ACEIRMC 4pcs Si7021 GY-21 SHT21 HTU21 Digital Humidity Temperature Sensor Module Replace SHT11 SHT15

  • The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
  • Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
  • It has a 4-pin interface that can communicate directly with the analog pins.
  • It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
  • The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..
Check Stock

DC-DC Converter Module Boost DC Step Up Voltage Regulator CV Stabilizer Power Supply Module 10-60V to 12-97V 1500W 30A

  • Stable Output: Boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC..
  • Intelligent Temperature Control: It adopts intelligent temperature-controlled fan design, and automatically works when the temperature reaches 60°C or so. It stops when the temperature is lower than 60°C..
  • High Conversion Efficiency: Step up module is made of high quality components, ensuring high conversion efficiency up to 97%..
  • Long Service Life: Boost converter is a non-isolated DC power converter module with a long service life..
  • Widely Used: It is widely used in high-power solar street lights, various LED lighting CV drives, car and mobile equipment power supplies, DIY adjustable CV power supplies, solar charging, and various battery charging..
Check Stock

KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast

  • Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
  • The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
  • More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
  • Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
  • Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..
Check Stock

XH-W3001 Digital LED Temperature Controller Module Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Electronic Thermostat Range from -50℃ to 110℃ (12V 10A 120W) (2 Pieces)

  • 2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C.
  • The high temperature control accuracy reaches 0.1℃.
  • Stable and reliable: the LED indicator light can display the current output status.
  • The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high.
  • Durable material: this XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance.
  • Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time.
  • Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others.
Check Stock

Icstation DC 12V Programmable Temperature Controller, Smart Home Incubator Aquarium Car Improvement Mini Digital Thermostat Regulator Switch Module Waterproof Sensor -58℉ to 230℉

  • 【Celsius & Fahrenheit Display】Programmable mini digital temperature control unit with -50℃ to 110℃ (-58℉ to 230℉) measuring range.
  • Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5%) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature.
  • 12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <.
  • Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W).
  • Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H).
  • Cable Length: 30cm/12inch, Probe: 2cm/0.8inch.
  • Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth.
Check Stock

Fast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module

  • FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
  • AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
  • STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
  • AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
  • SPECIFICATION: ​Forward Average Current IF (AV): 200A.
  • One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.
Check Stock

DC 12V Electronic Temperature Controller Programmable -50 to 110 Degree Celsius Heating/ Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor 2 Pieces

  • What will receive: you will get 2 pieces of DC 12V 200 mA temperature controllers, the measurement temperature is from -50 to 110℃(-58 to 230℉),....
  • Dual color LED display: this digital thermostat control module of dual color LED display, which show the measured temperature (red) and set....
  • Waterproof design: the NTC (10K 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according....
  • Reliable to use: the electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 0.1....
  • Wide application: the electronic thermostat can be widely applied in intelligent home and industrial equipment, suitable for household appliances,....
Check Stock