Reviews Remote Control Extenders Ir Receiver

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

DEMAO ir Repeater Kit ，ir Extender ，Infrared Repeater System Kit Remote Controls Home Theater Out of Sight .Control 1 DMIR0106TA Ir Repearter Kit

  • 1）With Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices..
  • 2）This 1x6 IR Repeater system makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight. This IR Block also features an Ethernet (CAT5 or higher) input on a terminal block connector for applications where the IR receiver needs to be further up to 100 meters away. To use Ethernet extension, an extra terminal block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range ....
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

  • 1）With Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices..
  • 2）This 1x6 IR Repeater system makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight. This IR Block also features an Ethernet (CAT5 or higher) input on a terminal block connector for applications where the IR receiver needs to be further up to 120 meters away. To use Ethernet extension, an extra terminal block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range ....
Check Stock

Att Formerly DIRECTV SMLD-00157-000 TiVo Replacement Remote

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for..
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!.
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over t....
Check Stock

Runrain TSGH-IR07 MCE Media Center Remote Control IR RC6 Windows 7 Vista NUC Kodi

  • Requires 2 x AAA Batteries(Batteries are not included)..
  • Play Media Right from your Remote Control.
  • Edit & View your Digital Photos and Videos.
  • Attention:This remote works with all PC Media Centers.You will need a IR Receiver.Please make sure your PC has one built in or purchase an external USB RECEIVER..
  • Package Include:1 x TSGH-IR07 MCE Media Center Remote Control IR RC6 Windows 7 Vista NUC Kodi(Bulk Pack)..
Check Stock

Nextgen IR Extender - Infrared Remote Control Distance Extender Kit - IR Repeater Kit with IR Emitter - IR Receiver Extender Controls All Your Home’s Remote Signal Devices - Hide Cable Box and Wires

  • ...nter with this IR repeater kit. Use our IR extender for Chromecast remote to extend TV power and volume distance , Alexa voice remote with power and volume, Alexa voice remote pro to extend TV power and volume , Roku simple remote (Not compatible with Roku voice remote and voice remote pro) control TV, cable box, , receiver, amp, Blu-ray player, and controlling various IR-controlled devices to extend distance and versatility..
  • KIT INCLUDES - 1 x IR receiver extender with built in power cell charger. 1 x Power adapter. 1 x Single eye IR emitter. 1 x Transmitter. 1 x Transmitter adapter for AA compartments. 2 x power rechargeable power cells..
  • MORE CONTROL FOR TV - Wield greater control over your TV volume and channel changing ability. Use it as a wireless cable TV extender to change the channel or adjust the volume from any room, including downstairs to upstairs. Works with all AA and AAA remotes..
  • 100 FT. RANGE THROUGH WALLS - IR remote control extender transmits your remote's signal up to 100 feet through walls, floors, windows, and doors offering limitless control, even from outdoors. Serious performance with zero la....
Check Stock

Clordeal 12V Power Supply 44key Wireless IR Remote Control + Control Box + 12V 5A LED Transformer for SMD 3528 5050 RGB Led Strip Lights

  • [44 KEY IR REMOTE CONTROL] Input voltage: 12V DC, Max output current: 12A, don't forget to remove battery plastic cover for the remote control before....
  • [LED REMOTE CONTROLLR BOX] Control mode: IR, Control distance: 5M (must be a certain degree to aimed at the ir receiver and without any obstacles).
  • [12V POWER SUPPLY] Output: 12V, 5A, Input: 100-240VAC, 50/60Hz, 1A , Power consumption: 60W.
  • [APPLICATIONS] Suitable for SMD 5050 RGB Strip Lights and SMD 3528 RGB Strip Lights..
  • [PACKAGE CONTAINS] 1 x 44 key remote control, 1 x RGB IR receiver, 1 x 12V 5A power supply.
Check Stock

BAFX Products All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (2 Device)

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for.
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Charter, Cisco, Cox, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!.
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter – sold separately), then paste the emitter using it’s own adhesive over the IR rec....
Check Stock