Reviews Receiver Lock Trailer Cover
Zarges Roof Rack Clamps (2) C/W 2 Padlocks
- 【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
- usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
- 【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
- 【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
- receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
- Push head firmly onto the pin and remove key.
- 【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
- 【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check StockMaster Lock 2866DAT 1/2 in. and 5/8 in. Swivel Head Receiver Lock for Class I-IV, 1 Pack, Black
- Receiver lock provides added security and theft deterrence while towing.
- 1/2 in. trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
- Locking head rotates 360 degrees allowing keyway to conveniently face forward.
- receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
- Push head firmly onto the pin and remove key.
- Snap-on cover provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
- 5/8 in. (16 mm) Diameter pin fits 2 in. (51 mm) Receiver Tubes, Class III/IV.
- 1/2 in. (13 mm) Diameter pin fits 1-1/4 in. (32 mm) Receiver tubes, Class II.
- Usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
- Included Components: Two Pins, Two Keys, One Locking Swivel Head.
- For compatibility with bike or other storage racks, please consult the rack manufacturer’s recommendations prior to using this product.
Check StockCURT 45534 Trailer Hitch Mount, 2-Inch Ball, Lock, Fits 2-In Receiver, 7,500 lbs, 2\ Drop, Cap
- DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
- VERSATILE USE. This trailer hitch ball mount comes with a 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 5/8-inch hitch pin hole and 8-1/4-inch overall length.
- READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch lock to securely mount onto your hitch receiver and deter theft.
- CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat, and the trailer ball has a polished chrome plating. It also comes with a durable storage case and a rubber hitch cover to protect the receiver.
- EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy.
Check StockTOEASYTY Heavy American Flag Metal Trailer Hitch Cover for 2 Inch Receivers,Tow Hitch Covers 2 Inch for Truck Accessories with 5/8-inch Pin Diameter Trailer Hitch Lock
- Heavy Metal - The panel of this American flag hitch cover is made up of two layers of heavy metal for more strength and stability. The upper layer is hollowed out to add a 3D stereoscopic visual effect, making it more distinctive..
- Hitch Cover - The tow hitch cover is made of high-quality stainless steel with a plated and coated surface of the trailer hitch covers. It protects the hitch receiver tube from mud, snow and debris, and pedestrian scrapes while increasing its durability for outdoor use..
- Hitch Lock - It is made of strong hardened steel and comes with 2 exclusive keys, making it very stable and anti-theft when using the tow hitch covers and pulling loads..
- Fits 2-inch Receivers - This trailer hitch cover fits all standard 2-inch hitch receivers such as pickups, SUVs, cars, and truck accessories. Protects the receiver while adding beauty to the rear of the vehicle..
- Easy Installation - Hitch covers 2 inch can be quickly installed and removed at the receiver. Hitch cover with extra gasket, hitch lock with O-ring to prevent friction and impact, extending the life of the receiver and hitch cover..
Check StockMETOWARE Keyed Alike Trailer Hitch Receiver& Coupler Lock Kit, 5/8\ Dia Pin Lock, 1/4” Dia 2-1/2\ Trailer Coupler Lock
- KEYED ALIKE - One key opens two locks. Each lock comes with 2 keys, for a total of 4 keys..
- RECEIVER LOCK FEATURE - The Trailer Hitch Receiver Lock Pin is designed with 5/8" diameter and 3-1/2” long to make it works well with class III IV hitches, big towing vehicle, truck, 2” 2-1/2” hitch receiver. (Please confirm your required size or email us for more suggestion before having the order)..
- HITCH LOCK FEATURES – Made of premium strength steel and coated with electrophoretic paint, our trailer hitch is durable and rust-proof. It is reliable for long-term hauling and is secure for full protection, safely protecting your trailer, boat, camper and so on from theft..
- RUST PROTECTION& DURABILITY - The electrophoretic paint on the surface of trailer pin lock with the addition of its watertight rubber cap, keep rust at bay even the lock always get soaked on any journey over wet or snowy roads, and keep the keyhole away from water and dirt..
- PUSH-TO-LOCK DESIGN - Both our trailer hitch lock and receiver lock are designed for easy operation. With the push-to-lock design, you can easily push to lock it without using key. To open it, just turn the key a little bit and the pin will pop out by itself..
Check StockLand Rover Genuine ROOF Rail Rack Lock System with Keys Range Rover 03-12 VUB002240
- ▶【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
- usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
- ▶【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
- ▶【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
- receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
- Push head firmly onto the pin and remove key.
- ▶【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
- ▶【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check StockHeavy American Flag Metal Trailer Hitch Cover for 2 inch Receivers(with 5/8-Inch Pin Diameter Trailer Hitch Lock )
- Each order comes with One Trailer Hitch Cover and One Trailer Hitch Lock 。 ( not for 2.5-inch receivers ).
- The Trailer Hitch Cover Made of Carbon Steel, the emblem made of aluminum,emblem size 5x3 inches..
- trailer hitch lock is made of solid hardened steel, and is not easily broken or rusted. With a 5/8-inch diameter pin, our product fits most Class III & IV hitches with 2 inch receivers.Each lock cylinder is unique and protects your hitch from theft.2 keys are included.
- Protects receiver tube when not in use, will keep the winter snow and ice outside, rather than inside. Keep out Mud, Dirt.
- UV Resistant, Waterproof, Durable enough to last under all weather conditions. Brand new, top quality..
Check StockMaster Lock Trailer Lock Trailer Coupler & Receiver Lock Combo Pack 3794DAT Red
- LOCK APPLICATION: Best used for vehicles, trailers, and RV hitch locks.
- EASE OF USE: Receiver lock features convenient Push to Lock locking mechanism: push lock body firmly onto the pin and remove key.
- DURABLE DESIGN: Weather Tough seal and watertight cap provide protection from moisture and dirt.
- SPECIFICATIONS: Stainless steel trailer coupler lock adjusts from 9/16 in. to 2-3/4 in..
- Fits 1-7/8 in., 2 in. and most 2-5/16 in. couplers.
- INCLUDES: One trailer coupler lock, one receiver lock, one trailer coupler latch lock.
- two keys (both keys open all three locks).
Check StockCURT 21728 Rubber Trailer Hitch Cover with 4-Way Flat Wiring Holder, Fits 2-Inch Receiver
- RELIABLE PROTECTION. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. It protects the receiver against dirt, water, debris and rust, while adding a finished look to your vehicle.
- WIRING HOLDER. This trailer hitch receiver cover comes with an integrated holder bracket to securely and conveniently mount your vehicle's 4-way flat trailer wiring connector, keeping it protected and on-hand whenever needed.
- STANDARD FIT. CURT trailer hitch covers come in industry-standard sizes to fit virtually any trailer hitch receiver. This hitch cover is designed to fit a 2-inch x 2-inch receiver tube, perfect for most class 3, class 4 and class 5 hitches.
- CONVENIENT. To eliminate the need for tools or additional components, this trailer hitch cap installs with a friction fit. There is no need for a hitch pin or clip.
- LONG-LASTING. This trailer hitch cover is made from quality black rubber, meaning it will never rust or corrode, in spite of frequent exposure to rain, snow, mud and other elements.
Check StockMETOWARE Trailer Hitch Lock, 5/8” Diameter Hitch Pin Lock 3-1/2” Long Pin with Anti-Rattle 8 Rubber O-Rings, Stainless Steel Tow Hitch Lock Compatible with Class III IV V Hitches (1 Pack)
- STURDY AND DURABLE: The lock body is made of stainless steel. The rubber key slot cover ensures that the zinc alloy tubular lock core is free from water and dirt, thereby protecting the inside of the lock from rust. It is difficult to copy the plum blossom key, which effectively reduces the record of stealing and opening, and is more secure..
- SAFETY EXPERIENCE: The trailer receiver lock is used to position the bolt to ensure traction safety and effectively prevent the trailer arm from falling off when working. The stainless-steel material improves the hardness and bearing capacity, unlike another material such as aluminum alloy and carbon steel, this lock remains strong and rustless even in extremely horrible climate..
- EASY TO OPERATE: This dog-bone type receiver lock can be locked without a key. To remove the locking mechanism, simply turn the key and the pin will pop out automatically..
- APPLICATION SCOPE: Compatible with cargo hook frame, hook ball and trailer rope, this 5/8 "pin can be used for most type of traction, for III / IV 2.
Check Stock