Reviews Quick Release Connector Clamp

HOIGON 2 Pack Double Handle Corner Clamp, 90 Degree Right Angle Corner Clamp with Adjustable Swing Jaw Aluminum Alloy for Woodworking, Welding, Framing

  • RIGID - The double handle right angle clamp forged with thick aluminum alloy material, lightweight but practical to last, thus the double handle right angle clamp is easy to carry and use. Steel solid threaded screw rod is durable and not easy to break or bend..
  • QUICK RELEASE - 2 red quick-release buttons on both sides of corner clamp with quick release are metal-made, which is more durable than plastic one. Press down the button for quick setup and adjustments or instant release of workpieces..
  • EASY TO GRASP - With a maximum clamping range of 2.56 inches, our double handle corner clamp comes with anti-skid rubber handles and adjustable jaws for fast clamping wooden, glass, metal or plastic pieces together at 90 degrees..
  • WIDELY USES - 2-pack 90 degree right angle clamps are suitable for drilling, welding, framing, or doweling to make cabinets, boxes, photo frames, canvas frames, aquarium, etc. A gift for woodworkers, gardeners, mechanics, handymen and DIY'ers..
  • BUY WITH CONFIDENCE - After you receive the double handle right angle corner clamp. If you dislike or have any probl....
Check Stock

Steelman Pro Quickalign 6-Inch Pipe Clamp for Welding, Accommodates 2-6-Inch Pipes

  • Heavy-duty steel pipe clamp designed to join two pipes together for welding.
  • Quick-release button lets clamp quickly adjust to clamp to or release pipes.
  • T-handle provides easy rotation of the ACME threaded screw for quick adjustment.
  • Carrying handle provides additional control when adjusting the clamp diameter.
  • Three wing bolts provide contact points to fine-tune the fit of pipe segments.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....
Check Stock

Quick Release Bolt, Bicycle Seatpost Clamp Bolt Quick Release Lever for Mountain Bike Road Bike ( Color : Silver )

  • PREMIUM MATERIAL: Quick Release Bolt is made of Aluminum alloy, this seatpost clamp lever is durable and sturdy..
  • UNIVERSAL FIT: Standard size suitable for all bicycles with hollow axles.
  • QUICK RELEASE: This Quick Release Bolt allows you to quickly and easily adjust the seat height without tools..
  • GREAT REPLACEMENT: This Seat Clamp Quick Release Lever is a simple replacement for your seat binder bolt..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

Kreg K5 Pocket-Hole Jig

  • The new Kreg Jig K5 is packed with features your are sure to appreciate.
  • It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
  • The quick-release Drill Guide Block makes set up simple.
  • Front-mounted clamp handle makes clamping easy.
  • Ratcheting clamp mechanism adjusts without tools.
  • Quick-release pin holds drill block in place, and can't get lost.
  • Storage Wings provide built-in storage for bits, screws, accessories.
  • Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..
Check Stock

Grifiti Nootle Quick Release Pipe Clamp and Universal Phone Mount Adjustable for iPhone, Smartphone, Galaxy, Pixel, Andriod, HTC One, Nokia, Fits Handlebars, Music and Mic Stands, Tripods

  • Two Grifiti Products sold together here! Grifiti Nootle Quick Clamp and Grifiti Nootle Adjustable Phone Tripod Mount. This has the same 1/4 20 threaded connector as on all our Nootle mounts, stands, tripods, and parts so this will work with all of them!.
  • No case removal needed! Wonderful, wide, super grippy rubber padded jaws that range from 1.75 inches to 3.5 inches so you can mount just about ANY phone in it's protective travel case..
  • You can use these together or on their own! Fits any 1/4 20 threaded stand, tripod or mount you already own! Works for iphones, galaxy, htc one, sony, nokia, android phones...even works for Galaxy Note II..
  • For handlebars, music stands, microphone stands, tripods, and more. Grifiti Nootle Quick Clamp has 1.5" padded arms that lock in place similar to a bicycle quick release lock..
  • Check out all our Grifiti Nootle Phone and iPad mounts, tripods, stands, flexpods, strappods, magnetic stands, and more..
Check Stock

Triumpeek 3/4 Garden Hose Connector Set of 9 Garden Hose Quick Connect Fittings Male and Female Quick Release Garden Hose Connector

  • PACKAGE INCLUDING female quick connectors*3, male quick connectors*6, and extra garden hose rubber washers*8..
  • UNIVERSALLY APPLICABLE: Tirumpeek 3/4" garden hose quick connector fits for all 3/4" standard garden hose and makes connection and disconnection....
  • PREMIUM MATERIAL: Triumpeek quick release hose connectoris made of high quality plastic and rustproof aluminum, lasting and durable. All the....
  • EASY TO USE: There is a spring mechanism on the female quick connector. For connecting, pull back and make the lock open on the female quick connector....
  • VERSATILE APPLICATION: Triumpeek quick release hose connector is widely used for garden hose, water line connector, faucet, water washer pressure,....
Check Stock

LISHINE 4 Inch & 8 Inch Bar Clamps, 8 Pack Quick Grip Clamps for Woodworking, Trigger Clamp One Handed Ratchet Clamp, Small Bar Clamp for Craft

  • 【4&8 Inch Bar Clamp】Wood clamps woodworking sets capacity up to 4 inch and 8 inch. Throat depth: 1.25 inch and 2.4 inch..
  • 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry. 8 inch bar clamp 150-lbs force for workholding hand tools, gluing, clamping and securing..
  • 【Clamp And Spreader】Ratchet bar clamps are used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
  • 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
  • 【Durable And Sturdy】Quick grip clamps for woodworking is made of nylon body and high-quality hardened steel that provide great impact resistance..
Check Stock

SMALLRIG Universal Low-Profile Quick Release NATO Rail Safety Rail 50mm/2inches Long with 1/4'' Screws for NATO Handle Camera Cage EVF Mount – BUN2468

  • 【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components.
  • 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage.
  • 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off.
  • 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.
  • 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release.
Check Stock

12 Pack 4 Inch Bar Clamps for Woodworking Quick Grip Clamps Trigger Clamp One Handed Ratchet Clamp, Mini Small Bar Clamps for Craft Wood Clamps for Gluing

  • 【Bar Clamp 4''】Wood clamps woodworking capacity up to 4 inch. Throat depth: 1.25inch..
  • 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry..
  • 【Clamp And Spreader】4 inch quick grip clamps for woodworking is used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
  • 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
  • 【Durable And Sturdy】Mini bar clamps are made of nylon body and high-quality hardened steel that provide great impact resistance..
Check Stock