Reviews Ptfe Tubing And Fittings

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • ...stance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion..
  • 4 Pcs Upgraded Bed-Level SpringsThe die springs are stiffer than ordinary spring, making bed levelling easier and stronger than the stock ones, and help your 3D printer much more stable while printing. If you have any questions and concern, please feel free to contact with us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
  • The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
  • Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check Stock

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

Authentic Capricorn PTFE 1M Tubing and Upgraded Pneumatic Fittings PC4-M6 and PC4-M10 with Metal Teeth MK8 Hotend Silicone Sock and Replacement Nozzles Ender 3 / Pro CR-10 Series

  • Capricorn PTFE tubing is designed with tight tolerances to dramatically improve print quality.
  • The silicone sock included help maintain a stable hotend temperature for more consistent extrusion.
  • 4 pneumatic fittings with METAL TEETH for superior performance to brass fittings with plastic teeth.
  • Replacement hotend nozzles come in .2 .4 .6mm for fine detail or much faster larger part drafting.
  • F1RST LAYER is a proud distriubtor of ONLY official Creality and Capricorn parts and accessories.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

SIQUK 5 Pieces Teflon Tube Blue PTFE Tubing 1M with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

  • 【Capricorn PTFE Tubing】100% Original Capricorn Bowden PTFE tube with the lowest friction on the market. Less friction means more responsiveness,....
  • 【0.4MM Nozzles】Made with centering CNC precision automatic lathe and one-time forming technology, make sure the interior of the 0.4mm nozzle is....
  • 【Upgraded Pneumatic Fittings】Two PC4-M6 Couplers for the extruder, made of premium copper and plastic, are sturdy and durable. Two PC4-M10....
  • 【Die Bed-level Springs】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They....
  • 【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please....
Check Stock