Reviews Test Plugs And Fittings
Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings
- ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
- and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
- ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
- ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
- ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check StockOKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16
- 64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
- A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
- The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
- Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
- Package including:#4 (7/16-20) JIC caps&plugs---each 10PCS| #6 (9/16-18)caps&plugs ---each 8PCS| #8 (3/4-16)caps&plugs---each 6PCS| #10 (7/8-14)caps&plugs---each 4PCS| #12 (1 1/16-12) caps&plugs---each 2PCS| #16 (1 5/16-12) caps&plugs---each 2PCS.
Check Stock(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain
- Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
- Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
- An internal hex socket drive is also known as an Allen drive..
Check StockJIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck
- ...elp to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
- COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included..
- COOLANT LEAK TEST AND THERMOMETER: Radiator coolant pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage.
- SATISFACTORY CUSTOMER SERVICE: This set widely compa....
Check Stock9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Red)
- 【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
- Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
- 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
- And then start the threaded end of the compression gauge in a spark plug hole by hand.
- Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
- Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
- Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
- If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Blue)
- 【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
- Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
- 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
- And then start the threaded end of the compression gauge in a spark plug hole by hand.
- Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
- Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
- Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
- If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Black)
- 【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
- Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
- 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
- And then start the threaded end of the compression gauge in a spark plug hole by hand.
- Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
- Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
- Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
- If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check StockJIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck
- ... to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
- WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included..
- HAND PUMP LEAK DETECTOR AND THERMOMETER: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage..
- SATISFACTORY CUSTOMER SERVICE: 30 days full refund wi....
Check StockHIFROM 25pcs M20 Copper Washers Flat Ring Sump Plug Oil Seal Gasket Sealing Fitting Washers
- 1. Quantity: 30pcs/set (1 sizes: M14 x 18 x 1mm ).
- 2. Material: Copper, high conductivity, corrosion resistant.
- 3.High conductivity, corrosion resistant copper washer assortment, Replacement for sump plugs, water, fuel and hydraulic fittings.
- 4.Easy to install: Sturdy and durable, great corrosion resistance Replacement for outside applications, easy to install.
- 5. Replacement for sump plugs, water, fuel and hydraulic fittings.A sump plug washer set to suit all types of engines be it Car, Marine, Generators, Machinery and Plant..
Check StockJACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)
- SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
- HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
- QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
- LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
- 100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
Check Stock