Reviews Ptfe Lined Butterfly Valves

Advantec 353130 Vacuum Filtration Manifold Stainless Steel 3-Branch with 3-Way Valves

  • Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection|three-way valve vent is a female luer slip connection to accept a standard syringe filter.
  • Two- and three-way valves feature ptfe stopcocks for smooth control|valves provide independent control at each branch for vacuum and venting|connect three or six filter holders to one vacuum source.
Check Stock

RVMATE RV Water Heater Drain Plug Kit, Include Angled Wrench, 4 Pieces 1/2\ NPT Replacement Plugs and 1 roll PTFE Tape

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Hourleey Brass Garden Hose Splitter (4 Way), Solid Brass Hose Connector 3/4\

  • Solid Brass: 100% solid brass make the 4 way splitter durable, heavy duty brass hose connecter support up to 0.8 MPa water pressure.
  • Durable: 100% solidbrass valves makes Hourleey 4 way splitter more durable than plastic valves, no leaking, standard 3/4 In. connection, fit most all standard hoses..
  • Dividually controlled: All the hose connector can be turned on and off individually, you can use one or others according to your need, greatly enhance the user convenience with freely switch..
  • Package include: 4-way solid brass splitter, 4 installed washers with extra 4 more washers, and 1 pack PTFE tape..
  • Tips: If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND.
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ...bility, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check Stock

Lifynste 4 Way Brass Hose Splitter, 3/4\ Heavy-Duty Brass Garden Hose Splitter, Garden Hose Adapter Connector

  • HIGH QUALITY MATERIAL: The brass hose splitter is made of 100% solid brass, solid and durable, corrosion proof and has a long service time..
  • COMPLETELY LEAK-TIGHT: Garden hose connector are equipped with high quality ball valves for tight closure. Garden hose separator effectively prevents any leakage or dripping..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose splitter is designed to easily accommodate all standard hoses, connects two hoses to one faucet and very convenient for you to control the work in different places at the same time..
  • INDIVIDUALLY CONTROLLED: This handy hose splitter includes 4 shut-off valves, ideal for 1 to 4 sprinkler hose faucet valves and enabling multi-tasking. You can use one or others according to your need, giving you the perfect flow for watering plants, flowerbeds, lawns, vegetable and washing your car, or cleaning your pets..
  • PACKAGE INCLUDES: The 4 way hose splitter comes with 4 pcs free rubber gaskets for replacement, and 1 PTFE pipe seal tape for easy and convenient connecting. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

Mann-Filter W 719/45 Spin-on Oil Filter

  • Silicone anti-drain back valve and PTFE-coated bypass valves.
  • Built tough for the needs of the high-output engines found in many European luxury and performance vehicles.
Check Stock

Cozyel 12 GPM Air-Operated Air Diaphragm Double Diaphragm Pump Cast Iron 115 PSI Dual Diaphragm Air Pump Petroleum Fluids 1/2 inch Inlet/Outlet QBK-15

  • Air-Operated Double Diaphragm Pump 12GPM 1/2Inch Inlet And Outlet. The diaphragm pump features an externally serviceable air distribution system and all-bolted construction, with convenient operating, are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.
  • A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid..
  • Rugged construction - resists corrosion for reliable performance and long life.Bolted construction is designed for leak-free fluid handling..
  • Good abrasion resistance and heat resistance..
  • Easy access to ball checks and fluid caps for maintenance and repairs..
Check Stock