Reviews Projector Mainboard - BestBuyersPro.com

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to....
2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use,....
3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for....
4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC....
5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo....

Mainboard Buzzer Length: Wire Length: 35mm/1.38inch, Total Length: 60mm/2.36inch.
Buzzer Cable: The Red Line is Positive, the Black Line is Negative.
Function: The Sound of the PC Internal Speaker Buzzer Can Judge the Working Status of The Motherboard.
Easy to Install: The Computer Motherboard Internal Speaker Come with 4 Pin Female Header Connector , Just Plug the Buzzer Into the Speaker Interface Of Mainboard Then Work.
Package Contents: 20pcs Motherboard Computer PC Internal Speaker Buzzer.

Update From kuman 13803KThe sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
More Applications Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications..
Rotary encoder has been added It makes parameter adjustment much quicker and easier..
DSO Shell comes with full enclosure The front panel and top/bottom brackets are flexible for easy user modification..
Detailed InstructionDetailed assembly instructions are provided in combination with troubleshooting guide and schematic..

... have been inserted into our puddle light are needed. Note:need to find out the 2 pins equipped with metal,then insert adapters to it.
For 2 pins car socket and can be inserted into our puddle light,please remove the adapters and pop our puddle lights in your car light socket directly..
What You Get:4* car door logo projector, 1 install tool, 12 month warranty,lifetime no-hassle customer support service..

UPGRADE: CR-10S updated with dual Z axies leading screw rod which make printing quality better and more stable, with different mainboard and firmware....
RESUME PRINTS: CR-10S has the ability to resume prints even after a power outage or lapse occurs..
FILAMENT MONITOR: CR-10S mainboard with filament alarming function, this function can detective if filament is running out or not..
WITH TWO COLORS (BLUE AND ORANGE) decorative strips inside. You can use either of them as per your preference..
EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well..

... have been inserted into our puddle light are needed. Note : finding out the 2 pins equipped with metal, then insert adapters to it.
For 2 pins car socket and can be inserted into our puddle light,please remove the adapters and pop our puddle lights in your car light socket directly..
What You Get : 4* car door logo projector, 1 install tool, 12 month warranty,lifetime no-hassle customer support service..

Connector1: USB 2.0 Socket Connector2: USB 3.1 Front Panel Header.
The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3.1 header..
Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. The compact adapter can be inserted directly and....
Converter plug-in for the mainboard Fits into any USB 3.0 header Bundling in USB 3.1 with up to 10 GBit / s.
The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. Thus, two data lines with 5 Gbps each are available, which....

... have been inserted into our puddle light are needed. Note:need to find out the 2 pins equipped with metal,then insert adapters to it.
For 2 pins car socket and can be inserted into our puddle light,please remove the adapters and pop our puddle lights in your car light socket directly..
What You Get:4* car door logo projector, 1 install tool, 12 month warranty,lifetime no-hassle customer support service..

... have been inserted into our puddle light are needed. Note:need to find out the 2 pins equipped with metal,then insert adapters to it.
For 2 pins car socket and can be inserted into our puddle light,please remove the adapters and pop our puddle lights in your car light socket directly..
What You Get:2* car door logo projector, 1 install tool, 12 month warranty,lifetime no-hassle customer support service..