Reviews Precision Puller Tool

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...ly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined b....
Check Stock

Coitak Tile Grout Saw Angled Grout Saw with 3 Pieces Extra Blades Replacement for Tile Cleaning

  • ...steel with black electrophoretic and polished finish which protect against corrosion and give our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking..
  • Multi-Function - Ideal for commercial work, repair and remodel projects where care and precision are needed including cabinets, countertops, flooring and many more. It can be used on a kitchen remodel, removing a couple of sections of baseboard, a countertop from some base cabinets, and pulling up a ceramic tile floor. The very edge can also used to pry up the staples..
  • Ergonomic Handle - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact absorbing FPR handle makes it comfortable to hold, though..
Check Stock

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • ...earing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Zenith 10" Self-Prying Bar

  • ... door casings, chair railing, decorative panel and even nailed or glued countertop.
  • LIFT IT, SEPARATE IT, DESTROY IT OR SAVE IT FAST! The unique self-prying action utilizes the strength of the closed center wedge to easily separate anything with reduced effort to allow for PRECISION SALVAGE when high value materials are involved.
  • INTEGRATED NAIL PULLER: The Pry Bar has 2 integrated precision nail removers, one located in the 90 angled face and the other in the tail making it Ideal for repair and remodel projects.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This pry bar is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
Check Stock

IWISS Dupont Connector Kit 2.54mm Pitch Single Row Male Headers Dupont Crimp Pins for 3D Printer and FPV Jumper Wire Ribbon Cable

  • Trim Saving - The trim removal tool has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged....
  • Revolutionary Tool - Our Trim Puller is a very beefy tool. The Build-in spring design assists in separating trim from wall freely and quickly. The 15....
  • Durable Pry Bars - Our trim puller are made from 65 Mn steel with black electrophoretic and polished finish which protect against corrosion and give....
  • Multi-Function - Ideal for commercial work, repair and remodel projects where care and precision are needed including cabinets, countertops, flooring....
  • Ergonomic Handle - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact absorbing FPR handle makes it....
Check Stock

GETLMUL Dent Puller Tool Kit, 108 PCS Auto Body Dent Repair Tool Kit with Dent Lifter,2 in 1 Slide Hammer, Aluminum Bridge Dent Puller for Auto Body Dent Removal, Minor Dent and Deep Dent Removal

  • High-Quality Dent Puller Tools Kit: Paintless dent puller tool is made of high-quality alloy and plastic, and the contact parts of the body are high-quality rubber precision packages, which can avoid damage to the original car paint..
  • Dent Puller Kit for All Requirements: Complete the dent puller kit to solve most dent repair problems. The dent puller, Bridge Dent Puller, Dent Lifter, and 2-in-1 Slide Hammer in the kit work together to make any dent repair process simple and easy. it’s environment friendly and will not heart the original painting of your car..
  • Easy to Use: Our car dent repair tools are very easy to understand and operate, and provide detailed manuals to guide you. Glue the heated glue on the pull tab, connect the pull tab to the depression, and wait for about 2 minutes to easily pull out the dent..
  • Dent Tool Kit Packaging Information:1*Golden Dent Lifter, 1*Silver bridge dent puller, 1*T-BAR for the repair of big dents, 1*Big Trigger Suction Cup, 2*Small Trigger Suction Cup,12*Black Dent Puller Tabs, 50*Blue Dent Repair Tabs, 1*100W Hot Melt Glue Gun, 10*Yellow Glue Sticks, 1*Rubber Hammer 9 X Tap down th....
Check Stock

DMDMBSR Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design

  • Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design.
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock

Trim Puller tile removal tool for Baseboard Removal,Trim Puller for Wood Baseboard Trim Removal,Nail Pulling Pry Bar and Molding Removal,for Siding and Flooring Removal-Trim puller tool for baseboard

  • 【⚒️High Speed Steel】：The tile removal tool trim puller tool for baseboard is made of 48Rc High Speed steel which is heated to temperature up to1180～1210℃ High speed steel has been greatly improved after high-frequency quenching and precision grinding for developing the optimum combination of hardness, strength.
  • 【⚒️Easy to use】：It can easily tilt into the ground or wall attachments you want to remove.The baseboard trim removal tool has a large, flatter, and wider contact area that can disperse the force without damaging the wall..
  • 【⚒️Customized Grip】: The handle of trim puller tool baseboard adopts the EDPM rubber encapsulation process，Have excellent aging resistance such as ozone resistance, heat resistance and weather resistance.It also has the function of shock absorption and noise reduction.It is the material selected by us after many tests..
  • 【⚒️Multi Function Tools】: The trim puller is specially designed for removing baseboards, tiles, door casings and other decorative panels safely.Standby for safe removal o....
Check Stock

Manelord Dent Puller - Dent Remover with T bar Dent Puller and Upgraded Dent Puller Tabs for Car Dent Repair and Metal Surface Dent Removal

  • Pro Design - Principle of leverage to design the slide hammer dent puller is ergonomic, efficient and labor. Works with hot melt glue to pull the dents out. So we suggest user buy hot melt glue gun and glue sticks to work with our dent repair tool..
  • Paintless Repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. In the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint..
  • Widely used - Dent puller kit is suitable for most of big dents. Efficient action on automobile and other metal surface dents..
  • For DIY - Dent removal tool is coming with detailed repair steps introduction for operating, it makes the dent removal process easily. Our car dent puller can help you repair dents quickly by yourself for many times.(No glue gun and glue sticks included.).
  • Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.).
Check Stock