Reviews Precision Power Subwoofers

5Core 6″ inch Subwoofer Replacement Pair DJ Speaker Car Subs Audio 900W PMPO PP Cone Red, 4 Ohm, 8oz Magnet WF 672 PP 2PCS

  • ... Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speaker for strong bonding between all parts of it. Best quality Lead-free solder used for a strong connection between Coil wire, Tag, and Copper tensile wire. Best Flexibility Spiders/Dampers for accurate cone movement..
  • These Subwoofers are ideally suited for a wide range of portable speech and music sound reinforcement applications. It renders optimal performance because of its high-compatible a....
Check Stock

NVX VSW84v2 8 inch VS-Series Car Audio Subwoofer - Dual 4 Ohm Voice Coil 500 Watts Peak & 250 Watts RMS

  • 8" VS-Series Version Two Car Subwoofer with a 4 Ohm Dual Voice Coil.
  • Power Handling: 250 watts RMS - 500 watts Peak | Sensitivity: 85 dB (1W/M) | Resonance Frequency (Fs): 36 Hz | Frequency Response: 20 - 200 Hz.
  • 2.5” Aluminum Voice Coil: Each of our subwoofers is equipped with a 2.5” aluminum voice coil, providing maximum current distribution throughout....
  • Accurate Hard-Hitting Bass: The VS-Series subwoofers pack a massive punch when it comes to bass output. Our subwoofers are designed with a non-pressed....
  • Aluminum Shorting Ring: What makes our subwoofers stand out from other subwoofers on the market is the aluminum shorting ring. The ring is a....
Check Stock

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • ... efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 15” x 10” x 2.4”, Weight: 11.2 lbs..
Check Stock

Infinity - Two Kappa 10' (250mm) 450Watt RMS High-Performance Subwoofers, Switchable 2 OR 4 OHM

  • Most car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands. A proprietary HARMAN technology, SSI lets you reconfigure your system by simply flipping a switch..
  • The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability. This aero-cooling design is unique among aftermarket subwoofers..
  • Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently nonresonant, the glass-fiber cones eliminates distortion so your music—and nothing but your music— comes through loud and clear..
  • Power is the lifeblood of any subwoofer. The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs..
Check Stock

Infinity - Two Kappa 12' (300mm) 500 Watt RMS, High-Performance Subwoofers, Switchable 2 OR 4 OHM

  • Most car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands. A proprietary HARMAN technology, SSI lets you reconfigure your system by simply flipping a switch..
  • The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability. This aero-cooling design is unique among aftermarket subwoofers..
  • Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently nonresonant, the glass-fiber cones eliminates distortion so your music—and nothing but your music— comes through loud and clear..
  • Power is the lifeblood of any subwoofer. The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs..
Check Stock

KICKER CompVR 12\ (30cm) Dual subwoofers in Vented Box, 2-ohm, RoHS Compliant

  • POWERFUL SOUND: Feel your music with the thump and thrum of sound through this 12-inch dual subwoofer.
  • RELIABLE DESIGN: Features dual 2-ohm subwoofers, making it easy to get the most out of your power amp.
  • POWER RATING: Rated at 400-800 watts RMS power and 1600 watts peak power.
  • SLEEK LOOK: Features custom embroidery and thick black carpeting that give the enclosure a sleek, refined look.
  • SPECIFICATIONS: SoloKon technology creates a single integrated unit that both cools the motor and eliminates distortion.
  • Recommended amplifier power: 400-800 wats.
Check Stock

BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control

  • ...hly efficient. Excess energy is stored until its needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications....
Check Stock

DS18 ZR212LD Dual 12" Loaded Subwoofer Enclosure Bass Package - 2 x ZR12D4 12" Subwoofers in a Ported Box 3200 Watts

  • The ported box is tuned to 29 Hz and helps get the most from your subwoofers by delivering a deeper, punchier bass..
  • Included in the ported box are two ZR12.4D subwoofers, one of our bestselling car audio subs, designed with dual 4-Ohms voice coils wired in parallel for a nominal impedance of 1-Ohm..
  • This loaded subwoofer combo offers great sound through high-quality and high-power subwoofers in a prefabricated box that is guaranteed to last!.
  • The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass.
  • Dual 12 inch car audio subwoofers with the cone area to blast great sounding bass more efficiently Subwoofers.
Check Stock

Hifonics BG-4000.1D Brutus 4000 Watt @ 1 Ohm Mono Car Amplifier+Remote Bundle with Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/RCA's

  • ...imal distortion.. Nickel-plated RCA jacks create the most efficient High/Low Level audio connection and resist corrosion.. Mono only. Variable electronic crossovers allow for complete control of the sound.. Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers..
  • Super D-Class designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs...
  • Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices.. High temperature impact resistant nickel plated connectors with Allen head set screws which allow for secure termination of wire and creates an erosion resistant seal.. Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire management profile..
Check Stock

BOSS Audio Systems AR3000D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply

  • ...hly efficient. Excess energy is stored until its needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 12.31 x 6.50 x 2.80, Weight: 6.86.
  • Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongl....
Check Stock