Reviews Precision Metal Machining Part

Bumlon Bike Multifunction Tools

  • 【Front sight adjust tool】 Front sight adjust tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) very well, which made solid steel construction. Makes adjusting front sight post quick and easy..
  • 【Double ended adjust tool】 Double ended adjust elevation ( 4 prong/5 prong ) front post adjusting tool for adjustment of 5-Prong A1 or 4-Prong front sights..
  • 【Steel part】One-piece precision machining steel part.Front sight adjustment tool to push down and adjust the front post faster and easier to adjust the sight..
  • 【Patterned surface 】Easy to hold due to the patterned textured grip surface,precision machined steel part and friendly use..
  • 【Precise adjustment】 Easy precision elevation adjustments for standard 4-Prong and 5-Prong front posts enhancing shooting accuracy.Note: since the product is mass-produced, there will be a little flaw on the surface and inside of the product. If you are more concerned about this, please buy carefully.In addition, the size of the product has been marked on the picture. Please pay attention to the size when ordering to avoid inappropriate size after purchase..
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

ARKMODEL German U-Boat Type VIIC Submarine 1:48 Scale Models Plastic Hobby Kit

  • ... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit..
  • Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction. VIIC Kit included: This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components..
  • Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pumps, steering gear, electronic governor, electronic switch, remote control equipment, batteries, etc., are installed in the WTC(water tight Cylinder),WTC need to buy separate. Coating ,RC and glue are not included.
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Macro Focusing Rail Slider for DSLR MILC Camera Tripod Ballhead and Phone Portable Damping Video Stabilizer Track Mini Precision Focus Close-up Shooting Clamp Plate for Macro Photography and Video

  • The main body of the macro focusing rail slider is made of aviation aluminum, CNC precision machining, corner grinding, surface anodizing and laser....
  • The inside of the portable damping video stabilizer track used 12pcs 9mm diameter metal bearings and 2pcs 11.5mm diameter copper pulleys, equipped....
  • The outer part of the mini precision focus close-up shooting plate is about 210mm long, about 60mm wide and about 20mm high. The inner sliding track....
  • The max load of the rail clamp slider is about 3kg. The stainless steel wire is used to transmit power. The rail slider has an independent resistance....
  • The track is suitable for Camera MILC and lens, tripod ballhead and phone. Can be used for Macro Photography and Video..
Check Stock

ARKMODEL VIIC Kit 1/48 German U-Boat RC Submarine Include Single Piston Tank WTC

  • ... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction.
  • This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components. Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pistons, steering gear, electronic governor, electronic switch, etc., are installed in the WTC.
  • This one VIIC already included WTC (water tight cylinder) Single Piston tank Kit,WTC Size:Length 736mm ,Beam 90mm Already included servos, ESC, BCU.
Check Stock

HHIP 2208-0625 5/8 X 5\ Right Hand S10K-MGIVR/L2 Internal Grooving Tool Holder

  • Tool holder design provides precision clamping and insert indexing accuracy.
  • Ideal for external grooving, turning, part-off, relieving and profile machining.
Check Stock