Reviews Aluminum Metal Machining Parts

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..

?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..

✔〚Specification〛: ⓵Motor Speed :12,000rpm ⓶Input voltage/current/power:12VDC/5A/60W ⓷Axis Y and Z Travel: 32mm ⓸Axis X Travel: 145mm ⓹Collet: 1-6mm ⓺Maximum Clamping Size of Vice: 50mm ⓻Working Material: Lignin plastic, soft metal (gold, silver, copper, aluminum etc.), acrylic, plastic, etc.
✔〚Main parts〛: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal..
✔〚High precision〛: Maximum motor power is 144W by using more powerful motor. Motor case and headstock are jointed.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
✔〚!!!NOTE!!!〛: Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it..

1.Inner diameter(thread) is1.93''(49mm),pls measure your tank before ordering.
3.Please measure the outer diameter of your tank opening.
4.Universal parts, will fit most Dirt Bikes, Pit Bikes. Comes with one aluminum Vent Cap.

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..

...oval of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
These Electrodes are 14 inches long and are available in Sizes: 3/32.

Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
Silver parts are made of aluminum, The black part is made of iron.

6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
The 12" long solid round rod bar is long enough to be cut and applied to different projects..

✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..

ZD Racing launched a 1/16 full-proportional controller four-wheel drive track flat sports car.
The full-scale re-engraved car shell is equipped with LED ambient lights.
A large number of metal structural parts are used, and the hollow and high-gloss design can effectively reduce the weight of the body, enhance the strength of the body, and have a full metal texture.
Aluminum alloy CNC precision machining bottom plate, hollow design.
effectively reduce the weight of the body and enhance the strength of the body.
The whole car adopts refined steel drive shaft, precision high-speed bearings, and high-strength gear power transmission system, which is not afraid of speed. Easily achieve indoor/track drift racing, bringing a super visual feast.