Reviews Pneumatic Pressure Relief Valve

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • 【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

VEVOR Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Double-Head Micro Engraver for Jewelry Crafts and Wrought Iron

  • Technical Parameter: Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • Precise & Adjustable Gauge: The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • Ergonomic Design: Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • Easy-to-operate Panel: Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • Various Application: Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock