Reviews Plastic Pe Pipe

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

RCB-1625 Replacement Blade for RI-DGID RC-1625 Pipe Cutter Blade, Tubing Cutter and Ratcheting Plastic Pipe 27858 Model - Cutting Pipes 1/8-inch to 1-5/8-inch O.D. (2 Pack)

  • ▶Replacement Blade◀ Compaitble With RI-DGID RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, for Ri-dgid 27858 RCB-1625 replacement blade is made to be used with The Ri-dgid 23498 ratchet action plastic pipe & tubing cutter..
  • ▶ Easy installation:◀ Since the blade is fixed with screws, the package includes 2 replacement blades and 2 screws for installation and fixing, which is convenient to install and replace the old blade..
  • ▶ Wide range of applications:◀ This is a replacement blade for ratchet pipe cutters, suitable for cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc and multilayer tubing Replacement blade only..
  • ▶with for:◀ This replacement pipe cutter blade for the RC-1625 Ratchet Cutter is ideal for pipe 1/8-inch to 1-5/8-inch O.D and multilayer tubing. The premium blade design combined with the pipe cutter's ratchet mechanism reduces the hand force required to cut hard plastic materials.
  • ▶Note:◀ To avoid machines that are not suitable for you, please check the user manual to check your model, if you have any questions in use, please contact us in time, we will reply you within 24 hours..
Check Stock

Libraton PVC Pipe Cutter 2-1/2\

  • IMPROVED BLADE: The Libraton PVC pipe cutter blade is of SK5 material, and an improved hardness process can ensure its longer service life..
  • CUTTING RANGE: The PVC cutter is of large cutting range, up to 2-1/2-inch (63mm) outer diameter..
  • WIDE APPLICATION: The ratchet PVC cutter can be also applied to cut different plastics pipes and tubes (PVC, PEX, CPVC, PP-R, PE, Rubber Hose, etc.). It is not recommended for cutting THIN PVC pipe..
  • RATCHET DESIGN: The plastic pipe cutter is designed with a ratcheting driver so that you can do the pipe cutting job with one hand easily. OUR TEST SHOWS THAT ONE CUT WITHIN 5 TO 20 SECONDS ONLY..
  • AFTER-SALES SERVICE: We offer a 12-month warranty on this PVC pipe cutter. And our after-sales service team promise to reply to your ANY question WITHIN 24H to help you solve ANY problem with the PVC cutter..
Check Stock

PSW TRADE SUPPLIERS LTD Plastic Pipe Cutter for 1-5/8-inch Plastic Pipe, PVC, Rubber Hose

  • Plastic pipes and tubes pipe-cutting tool for pipes 1-5/8 inches in diameter.
  • Pipe cutter with the rubberised handles for non-slip, secure handling and a safety lock lever to protect it from unauthorised use by children.
  • Automatic, controlled opening of blade at the release of lever lock. The spring-loaded ratchet wheel remains in place, preventing the cutters from closing.
  • The thick and sharp blade is made of high-quality stainless steel, with high hardness and high shear force and spring loaded ratcheting wheel.
  • Suitable for all types of plastic pipes and tubes including PVC, PPR, PEX pipe, PE and rubber hose.
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

PVC Cutter 2-1/2\

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • ...ription]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manual.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • ... Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

PVC Cutter, Cuts up to 2-1/2\ Pipe Capacity Ratcheting Cutter, One-Hand Tubing Cutte (PVC Cutter)

  • Cuts pipe volumes up to 2-1/2" (OD) with pipe thicknesses between 3-10mm.
  • Adopt ratchet drive technology and arch angle design, which greatly saves your strength.
  • For cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc.).
  • 2.8mm thick 4.0 manganese steel sharp blade designed for precise cutting.
  • 1/2" increments on the bottom of the handle for quick pipe measurement.
Check Stock

Libraton PVC Cutter 1-5/8\

  • ...ess aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter..
Check Stock