Reviews Plastic Air Pipe Fittings

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (1/4 Inch OD)

  • You are provided: the package comes with 7 pieces 1/4 inch direct pneumatic parts (PU), 7 pieces 1/4 inch V two-way parts (PV), 7 pieces 1/4 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (3/8 Inch OD)

  • You are provided: the package comes with 7 pieces 3/8 inch direct pneumatic parts (PU), 7 pieces 3/8 inch V two-way parts (PV), 7 pieces 3/8 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse

  • PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
  • The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
  • Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
  • Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
  • Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
  • tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
  • PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
  • Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock