Reviews Plasma Digital

Lab Benchtop Centrifuge Machine Large PRP Centrifuges 10ml/15ml *6 Capacity,500-5000rpm(Max. 3074xg),Digital Display w/Timing

  • Digital plasma centrifuge for up to 6 of 15ml tubes .Speed can be adjusted from 500-5000rpm,max relative centrifuge force is 3074xg.Timing Range is 10s~99min59. The LCD display with ability to change between RPM and RCF can show time and speed at real-time, more conducive to the observation of samples..
  • This centrifugadora de plasma is with short time centrifugal function. Short spinning is possible as long as the SHORT button is held down.No need to set the speed and time . With Intelligent electronic lock automatically open the cover after the machine runs, without manual pressing..
  • The aluminum alloy rotor of this prp centrifuge machine is calculated as an optimized design,it has the advantages of light weight and high speed .Hollow soundproof cover,fully absorb noisy,quite operation. Perspective window can directly observe the operation.
  • Powerful sucker hold the table firmly,make this low speed laboratory centrifuge run smoothly..
  • JOANLAB centrifuge plasma prp machine is widely used in Widely used in clinical medicine, analytical laboratories, biology, genetic engineering, immunology, etc..
  • Directly from manufacturer-JOANLAB is a professional laboratory equipment manufacturer.One year warranty with professional customer support..
Check Stock

SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean Cut (CUT 50)

  • 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators..
  • 【Digital Display】DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands..
  • 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection. Comes with wire and mask, which can prevent you from hurting while using..
  • 【Wide range of applications】Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY users but also fully accommodating the demands of professional operators..
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

ILJIN DISPLAY USA Auto-Darkening Welding Helmet Replace Lens fit Lincoln Electric Models

  • Lens dimension (5.24" x 4.5" x 0.35") fits most of Lincoln Helmet models.
  • Auto-darkening lens with digital advanced welding technology.
  • Large Viewing Size 98 x 89mm / 3.86" x 3.50" with 4 sensors with the best visual effects, reduce visual fatigue.
  • Internal Variable Shade,Sensitivity, and Delay Control by Digital with Permanent UV/IR protection.
  • Great For Arc, Mig, Tig Plasma Cutting Applications with Grinding Feature.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Digital Optical Audio Converter Kit - Digital Optical Coax to Analog RCA Audio Adapter with RCA and Toslink Fiber Cable

  • Perfect For: Seamlessly converts coaxial or TosLink digital PCM audio signals to analog L/R RCA - Irreversible (Can not be used in reverse).
  • Easy to Install: Features a compact, portable and plug & play design that doesn't require additional drivers or software.
  • Supports: Sampling rate at 32KHz, 44.1Khz, 48Khz and 96KHz.
  • Perfect For: Home Theater Systems including HD DVD, Ultra HD, Plasma, Blu-Ray Players, Apple TV, Gaming Consoles (including PS3, PS4, Xbox One) and....
  • Includes: Black Digital Optical Audio Converter, Power Adapter + BONUS - RCA Cable and Digital Optical Audio TosLink Cable.
Check Stock