Reviews Pci Fpga Development Board

waveshare USB Blaster V2 Download Cable Programmers Debuggers Support ALTERA FPGA, CPLD,USB 2.0 to PC,JTAG, AS, PS to The Target Device

The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board..
The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA..
You can use the USB Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production..
It surpports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, Enhanced Configuration devices, and supports AS, PS, JTAG three download modes..

1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A..
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150....
DC-DC Boost module working frequency 1.0MHZ..
2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA / CPLD Development Board friendly..

...egulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, no worry about safety and bring you more convenience.
Operating junction temperature range: -40 to 125°C, welding temperature (25 seconds): 265°C, storage temperature: - 65~150°C.

snickerdoodle Single-Board-Computer Baseboard.
HDMI Type A Input and Output up to WUXGA (1920 x 1200p) at 60Hz and 8-ch., 32-bit/192kHz HDMI Audio.
Dual FPGA-Connected Gigabit Ethernet RJ45 Jacks with PHY Support for Time-Sensitive Networking (TSN).
Stereo Audio Line Input, Output, and Headset (Mono Mic) via 3.5mm Jack with Dedicated 96kHz CODEC.
Four USB 2.0 Hi-Speed Standard-A Host Receptacles, 25 Reconfigurable FPGA I/O Pins, Xilinx JTAG.

This PCI-E GPU extender features gold-plated contacts and has good performance, it can be used for a long time.
There are 4 capacitors on this PCI-E 1X to 16X board to make the power supply stable and secure.
The PCI-E GPU adapter features a stable resistance and has 3 LED light to display the working states.
The GPU extender riser card has a 6pin interface, you can easily connect and the 6pin interface also can reduce the burden of the motherboard.
The PCI-E riser board features a fixed buckle, which can fix the graphic card, so the card won't easily fall.

Memory: 4x DDR3-3200(OC)/ 3100(OC)/ 3000(OC)/ 2933(OC)/ 2800(OC)/ 2666(OC)/ 2600(OC)/ 2400(OC)/ 2250(OC)/ 2200(OC)/ 2133(OC)/ 2000(OC)/ 1866(OC)/ 1600/ 1333 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
Slots: 2x PCI-Express 3.0/2.0 x16 Slots, 3x PCI-Express2.0 x1 Slots, 2x PCI Slots.
Ports: 6x USB 3.0 Ports (4 rear, 2 at mid-board), 8x USB 2.0 Ports (2 rear, 6 at mid-board), 1x PS/2 Keyboard/Mouse Combo Port, 1x DVI-D Port, 1x VGA Port, 1x HDMI Port, 1x RJ45 LAN Port, Audio I/O Jacks.

★[A9G Development Board] – The A9G development board is a versatile development board based on A9G GPRS / GSM + GPS / BDS module that can be used to validate the basic communication functions and peripheral functions of the A9G module..
★[Multifunction] – A9G development board with the basic phone / SMS, GPRS networking communications, GPS / BDS dual-mode positioning capabilities..
★[Specification] – A9G development board contains a lithium battery charging management, microphone, speaker interface, USB communication interface, multiple user keys / led, TF card slot, accelerometer, I2C2 interface, ADC interface..
★[External Interface] – A9G development board camera expansion board, an external 30W / 200W camera.A9G development board coin machine expansion board, can be external traditional coin machine..
★[After-Sale Service] — Good day. every effort to provide customers with satisfactory service.If you have ANY questions, please email us and BELIEVE us, we will reply you soon..

The PCI-E expansion riser card adapter is designed to convert 1 PCI-E 1X slot into 4 PCI-E 16X slots. The 4 PCI-E 16X slots could connect sound card,....
imultaneously support 4 PCI-E 16X devices, non-interference. Customized for mining BTC. 2 layers PCB board design. Compliant with PCI express 2.0 &....

NOTE: The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. (compatible with X4, X8, X16 slot).
HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency!.
HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher!.
COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS: HiveOS, DOS, Linux, Windows XP/7/8/10..
PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator..

【Versatility】PCI-E 1X,PCI-E 2X,PCI-E 4X,PCI-E 8X,PCI-E 16X.
【Safety】With SATA 15pin Male power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply..
【Compatibility】Fit for all Window Linux Mac OS System..
【What You Get And Shipping】1x PCI-E 16X Board, & 1x Riser Card, & 1x USB 3.0 Cable, & 4x SATA 15Pin-4Pin Power Cable. SHIPPED FROM THE U.S. Delivery time takes about 2-5 business days..