Reviews Parallel Clamp

BESSEY DUO45-8 18 In DuoKlamp Series One Hand Clamp/Spreader

  • Changes from clamping to spreading with a quick twist of a dial.
  • Only reversible clamp that does not require some degree of disassembly to change direction.
  • Ergonomic handle with pump lever configured parallel to the rail for balanced, safe handling.
  • Quick press of a button allows the clamping arm to quickly slide up or down to clamping position.
  • Large polyamide parallel jaws facilitate clamping on all four edges.
Check Stock

Bessey KREX2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 2 KBX20 Extenders

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Bessey KREX2450 K Body REVO Clamp Kit 2 x 24 In. 2 x 50 In. and 2 KBX20 Extenders

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Bessey KREK2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 1 Set of KP Blocks

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Bessey KREK2440 K Body REVO Clamp Kit 2 x 24 In. 2 x 40 In. and 1 Set of KP Blocks

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

2 Pack MFT Style Hold Down Clamp Long Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy 19mm - Lengthened Version

  • Longer shaft can work on thicker boards, clamping capacity reach to 5.9 inch.
  • Bench dog clamp, no damage to the workpiece,simple operation.
  • Own them, give new vitality to the workbench.
  • All metal construction,the clamp is made of quality aluminum alloy and stainless steel.
  • Perfect workmanship,very well and neatly processed.
  • High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions.
  • Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole.
  • The cam is running perfectly parallel to the pressure plate which means pressure is well distributed.
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Yakamoz Universal Mini Drill Press Vise Clamp Table Bench Vice for Jewelry Walnut Nuclear Watch Repairing Clip On DIY Sculpture Craft Carving Bed Tool

  • Bench dog clamp, no damage to the workpiece,simple operation.
  • Own them, give new vitality to the workbench..
  • All metal construction,the clamp is made of quality aluminum alloy and stainless steel.
  • Perfect workmanship,very well and neatly processed..
  • The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be..
  • High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions..
  • Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole.
  • The cam is running perfectly parallel to the pressure plate which means pressure is well distributed..
Check Stock

Champion Power Equipment 200951 2500-Watt Portable Inverter Generator, Ultralight & 100740 30-Amp ParaLINK Parallel Kit for Linking Two 2000 to 3000 Watt Inverter Generators, RV Ready

  • Product 1: ULTRA-LIGHTWEIGHT: At only 39 pounds, this inverter is one of the lightest 2500-watt inverters in the industry.
  • Product 1: QUIET OPERATION: 53 dBA from 23 feet is perfect for camping, tailgating or to backup a few home essentials, featuring 2500 starting watts, 1850 running watts and up to 11.5 hours run time.
  • Product 1: PARALLEL READY: The optional clip-on parallel kit enables this inverter to connect with another 2500-watt Champion inverter to double your output power.
  • Product 1: CLEAN POWER: Includes two covered 120V 20A household outlets with clean electricity (less than 3% THD).
  • Product 2: Equipped with enough power to start and run most 15,000 BTU RV air conditioners.
  • Product 2: Seamlessly integrates any two 2000-watt to 3000-watt ParaLINK ready inverters with a hand-tightened clamp for easy attachment.
  • Product 2: Parallel two lightweight and ultra-quiet inverters to get the power of a larger unit when you need it.
  • Product 2: 120V 30A (TT-30R) RV outlet and a 120V 30A locking outlet (L5-30R) with a 30-amp circuit breaker to prevent overloads.
Check Stock