Reviews Oil Filter Adapter Bushing

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

DANCO Trip Lever Tub and Bath Drain Trim Kit with Overflow Plate, Oil Rubbed Bronze, 1-Pack (10580)

  • BATHTUB DRAIN TRIM KIT: This tub drain kit with included bushing adapter is designed to fit 1-1/2 in. and 1-7/8 in. tub drain shoe sizes.
  • OVERFLOW PLATE REPLACES 2-HOLE OVERVFLOW PLATES: The 2-hole face plate includes pin to attach to the tub drain linkage.
  • simply lift up on the trip lever to close the drain to fill the tub with water and push down on the trip lever to open the drain.
  • DRAIN TUB SHOE DIMENSIONS: Tub Shoe Diameter 1-1/2 in & 16 TPI (Threads per inch).
  • Tub Shoe Bushing Adapter Diameter 1-7/8 in. & 11.5 TPI (Threads per inch).
  • OVERFLOW PLATE DIMENSIONS: Trip lever overflow plate holes are 2-inches in on center and 3 inches across in diameter.
  • drain trim cover exterior is slightly under 3 inches.
  • TUB DRAIN STOPPER: The bathtub strainer catches hair and debris while allows for water to flow freely down the drain.
  • HASSLE-FREE DIY INSTALLATION: Complete tub drain trim kit includes a 2-hole face plate, strainer, overflow plate, bath shoe, threaded adapter and screws.
  • BUILT TO LAST: Brass construction provides strength and durability to withstand the rigors of everyday use.
  • OIL RUBBED BRONZE FINISH: This modern Oil Rubbed Bronze finish will update your existing bathtub trim and complement your bathroom décor.
  • TOOLS NEEDED: Screwdriver, Pliers and Plu....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

onlineseal U9-229 O-218 O-Ring for Dura/Max-E-Glas Pump Lid 2/ Pack

  • Fits Sta-Rite System 3 Modular Media SM series pool and spa cartridge filter model S7M120, S7M400, S8M150, S8M500.
  • Compatible with Sta-Rite System 3 SD series pool and spa D.E. filter model S7D75, S8D110.
  • Fits with Sta-Rite System 3 SS series pool and spa sand filter model S8S70 and S7S50.
  • Valve and gauge assembly includes pressure gauge 2-inch, air release valve, nipple, adapter bushing, and O-ring..
Check Stock

JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter

  • Adjustable Fit: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles..
  • High Hardness Material: The oil filter wrench is made of carbon steel which is much stronger than normal material and more durable and handy to remove oil filter.
  • 3 Jaw Design: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied..
  • Compact Design: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces..
  • Added 2 Drive Adapter : Not only the oil filter wrench, but also 2 pcs Drive Adapter are included in box to provide the extra Drive for your oil filter.
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Danco 88966 Universal Lift and Turn Bath Drain Trim Kit with Overflow Plate, Chrome

  • EASY BATHROOM FIXTURE UPGRADE: Chrome finish provides a stylish elegant look to your tub/shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit most faucet brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

BESTILL Bathtub Drain and Overflow Faceplate Oil Rubbed Bronze

  • BESTILL Lift and Turn Bathtub Drain, Solid Brass Construction, Ensure Quality and Long Lifetime..
  • The Drain Stopper Fits US Standard Bathtub Waste with Diameter 1 3/8" or 1 1/2" Drain Hole..
  • Brass Overflow Cover is Single Hole Style, Easy to Work with Universal Bathtub Waste with Top Elbow..
  • Oil Rubbed Bronze Tub Drain Kit, Matches Your Oil Rubbed Bronze Bath Fixtures..
  • Drain Plug, Rubber Gaskets, Threaded Adapter Bushing, Overflow Face plate, Screw and Installation Included, Easy to Install..
Check Stock

Danco, Brushed Nickel, Universal Lift and Turn Bath Drain Trim Kit with Overflow, 89239, 1-Pack

  • EASY BATHROOM FIXTURE UPGRADE: Brushed Nickel finish provides a stylish elegant look to your tub/shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit most bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock