Reviews Natural Fiber Wood Filament

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

Raise3D Pro3 Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 11.8" Dual: 10" × 11.8" × 11.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

Raise3D Pro3 Plus Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 23.8" Dual: 10" × 11.8" × 23.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

4Rolls Bi Directional Filament Tape, Fiberglass Reinforced Strapping Tape, 6.7mil x 2inch x 55yds, BOMEI PACK

  • 6.7 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest jobs. Cut by scissors..
  • Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • With Special formulated, bi filament tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, cardboard etc....
  • Filament packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • Bi filament fiber reinforced tape is ideal for furniture maintenance, heavy goods wrapping, carton sealing, carpet fixing, toy& vehicle patching and protecting..
Check Stock

6PACK Reinforced Packing Tape, 5.5Mil 2Inx 60Yds, Heavy Duty Fiber Strapping Adhesive Packaging Tape, BOMEI PACK

  • ✔5.5 mil thickness clear reinforced packing tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
  • ✔Transparent filament strapping tape with smooth surface is perfect for heavy duty goods packing, strapping, fixing, reinforcing, repairing and palletizing..
  • ✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
  • ✔Fiber reinforced adhesive packing tape is weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • ✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
Check Stock

eSUN Wood PLA Filament 1.75mm, Wood PLA 3D Printer Filament, 0.5KG Spool 3D Printing Filament for 3D Printers, Wood Color

  • 【Wood PLA Filament】Special surface like wood, come along with wood's natural and unique texture. Perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a wood-like appearance. Fulfilled the demand for wooden print models..
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise..
  • 【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder..
  • 【Environmental Friendly PLA】Wood PLA is a mixture of PLA and recycled wood particles, which produces natural wood effect. Made with starch raw materials derived from renewable plant resources, biodegradable and eco-friendly, non-toxic and low odor..
  • 【Vacuumed Sealed Packaging】0.5KG Spool Wood PLA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sea....
Check Stock

BOMEI PACK Fiber Reinforced Packing Tape, Clear Bi Directional Filament Strapping Tape 3Inch x 55yds 6.7Mil, Total 110yds

  • ✔5.3 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
  • ✔Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • ✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
  • ✔Filament reinforced packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • ✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
Check Stock

AMOLEN 3D Printer Filament Bundle,Wood PLA Filament 1.75mm Bundle,Wood Filament,Marble PLA,Sparkles Gold,Bronze,3D Printing Filament Bundle,225g X 4 Spools

  • ✔PLA FILAMENT BUNDLE - 225g Wood Filament,contacts 20% real Bamboo fiber,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
Check Stock

Upgraded SUNLU 3D Printer S8 Pro, FDM 3D Printer with Silent Motherboard, Large Printing Size 310x310x400mm, Resume Printing, Removable Magnetic Heated Bed, Pre-Assembled Printers, Open Source

  • ... and start printing. Disassembly is also simple, it’s convenient for users to upgrade and build their own printers(open source).Greater stability..
  • ④【Intelligent Clog Detection&Resume Printing】→ Suspend when clogging, resume after hadled. High-end detection module, real-time detection and identification of filament loading state, instantaneous response to suspend printing within 1 second after filament run-out..
  • ⑤【Equipped with with filament dryer box】→ SUNLU’s new version printer S9 Plus is compatible with many kinds of FDM printing filaments in the market, including PETG, ABS, TPU, Wood Fiber, Carbon Fiber, PLA filament, etc. Filament drying while printing , removal of moist and brittle filaments, achieving optimum print quality..
Check Stock

IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer

  • IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
  • PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
  • Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
Check Stock