Reviews Motor Wire

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

2Pcs AC 110V 120V 220V 230V 10000W Motor Speed Controller Electronic Voltage Regulator 10000W High Power SCR Dimming Attemperation Thermoregulation Board…

  • 【High quality】Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one.
  • 【Product size】length 86.8mm/3.42in,wide 32mm/1.27in,high 35mm/1.39,wire length is 120mm/4.7in.
  • 【Material】This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
  • 【Application】Widely used for 12-24V DC electric appliances. Adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc.
  • 【Way of connection】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Pactrade Marine Boat Trolling Motor Foot Control Switch Continuous On Lever 50A

  • This is a Trolling Motor Control Switch that is made for 12V, 24V trolling motors. This product is made of Black PC and it comes with a push switch..
  • This trolling motor is rated to 50 Amps and has a weatherproof control system at IP:65. It also comes with a continuous "ON" lever..
  • For installation, select a desired location for switch. Then, mount the switch to deck with fasteners included..
  • Connect the negative wire of motor to the negative of DC as shown in the diagram. Connect a wire of the switch to 12/24VDC positive. Connect another wire of the switch to the positive of the motor as shown in diagram. Test the operation after set-up..
  • Product Dimension (Switch): 3-1/4" x 2-1/2" x 1-1/4". Item Number: P72520-02..
Check Stock

Red Lion RL12G10-2W2V 4-inch Submersible Deep Well Pump, 1 HP, 12 GPM 2-Wire, 230-Volt, Steel, 14942404

  • SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 434 feet.
  • NSF/ANSI 372 certified for potable water.
  • BUILT-INS: built-in check valve help keep pump from rapid cycling and extends the motor life.
  • built-in suction screen helps keep debris out protecting the impellers.
  • 1 HP MOTOR: 2-wire, 230-volt motor (not including the ground wire) rated for 12 GPM and draws water from 434 ft. (at 50 PSI delivers 12 GPM at a draw down of 334 ft.).
  • 2 WIRE TECHNOLOGY: the RL12G10-2W2V is a 2-wire (plus ground) submersible pump.
  • the switch mechanism is built into the pump.
  • NSF/ANSI 372 certified for safe drinking water.
Check Stock

DC Motor Speed Controller Universal DC 12V 24V 10A Electronic Stepless Speed Regulator Switch for Car Truck Fan Heater Control

  • 【Universal】Voltage 12V or 24V. Overload current: 10A. Supports high power, 12V/120W, 24V/240W.
  • 【Features】Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one. Extra long knob screw to meet installation needs.
  • 【Wiring】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
  • 【Heat dissipation】This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
  • 【Application】Widely used for 12-24V DC electric appliances. Adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc.
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

ACauto 4P1516 Heating and Air Conditioning Blower Motor Resistor Replaces 15-81773, 89018778 Fits Chevy Silverado Tahoe Suburban/GMC Sierra Yukon/Buick Rainier & More (Complete Kit with Harness)

  • Type:Blower Motor Resistor Conditioning Kit.
  • Part Number Fitment: 15-81773, 89018778, 89019351, 19260762, 15-80567, 52495874, 251946786, 52416100, 22754990, 15850268, 10325408, 10356906, 10397570, 15827470, 15827491, 52497491, 89018653, 89018849, 89018964, 93803635, 93803636, 973-508.
  • This Blower Motor Resistor fits Chevy Silverado 1500 1500HD 2500 2500HD 3500 3500HD Chevy Avalanche 1500 2500 Chevy Suburban 1500 2500 Chevy Tahoe Chevy Trailblazer GMC Sierra 1500 1500HD 2500 2500HD 3500 3500HD GMC Yukon Yukon XL GMC Envoy Buick Allure Century LaCrosse Rainier Cadillac Escalade EXT and more vehicles, Blower Motor Resistor With Wire Harness..
  • Each Kit Includes:Blower Motor Resistor,Wire Harness,Heat Shrink Crimp Connectors,Mounting Screws.2005 silverado blower motor resistor,blower motor resistor 2008 trailblazer,silverado blower module,2004 gmc blower motor resistor,2004 suburban blower motor,silverado blower motor module,2004 tahoe ac resistor,2003 tahoe blower resistor,2005 gmc blower control module,2006 silverado ac blower resistor,2005 gmc blower motor resistor..
  • 100% Brand New and tested prior to leaving the factory.1 Year Warranty.If you have any inquiries about this item, please feel free to email us..
Check Stock

DD 90mm EDF 12 Blades Ducted Fan with 1450KV RC Brushless Motor Balance Tested for EDF 6S RC Jet Airplane

  • Advantages:All the EDF with motor have already dynamic balance tested.Running smoothly,Easy cooling,Stable structure,Safe and durable,excellent realistic sound.Make your plane more Efficient and stable.All the motor has been soldered the banana plug..
  • Main Parameter: 90mm EDF with 1450KV/6S motor: max continuous current is 124A,max thrust is 3790g.Motor weight 224g.Thus we recommend 120A ESC and 6s battery..
  • motor: motor Continuous operation, high temperature resistance,wear resistance and stable,it’s more anti-aging and durable.Premium motor provides stable and balanced operation when in continuous working..
  • High-Quality ducted fan:fan make of high-quality engineering materials,Sturdy body,stable structure.Removable guide ring design,Adapt to a variety of models..
  • Pure copper wire: strong conductive, fast heat dissipation, high temperature resistant silicone wire..
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock