Reviews Motor Driven Valve

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ...5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc..
  • Product 2: Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption..
  • Product 2: High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability..
  • Product 2: Adjustable Bolt Design: An adjustable bolt on the portable rebar cutter achieves manual-like precision and ensures cutting stability when cutting rebar of various sizes. You only need to put the steel bar in the cut and adjust the bolt to fix it. Once set, all lengths will be uniform, so cutting is accurately repeated..
Check Stock

Red Lion RL12G10-2W2V 4-inch Submersible Deep Well Pump, 1 HP, 12 GPM 2-Wire, 230-Volt, Steel, 14942404

  • SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 434 feet.
  • NSF/ANSI 372 certified for potable water.
  • BUILT-INS: built-in check valve help keep pump from rapid cycling and extends the motor life.
  • built-in suction screen helps keep debris out protecting the impellers.
  • 1 HP MOTOR: 2-wire, 230-volt motor (not including the ground wire) rated for 12 GPM and draws water from 434 ft. (at 50 PSI delivers 12 GPM at a draw down of 334 ft.).
  • 2 WIRE TECHNOLOGY: the RL12G10-2W2V is a 2-wire (plus ground) submersible pump.
  • the switch mechanism is built into the pump.
  • NSF/ANSI 372 certified for safe drinking water.
Check Stock

90167Y GENUINE Echo Tune Up Kit Air Fuel Filter Spark Plug CS-590 CS-600P Cs-620 OEM

  • Powerful 2-stroke, professional grade motor of the Echo 20-inch 59.8cc gas chain saw permits long run times.
  • Automatic oiler system is clutch driven for automatic delivery of lubricants.
  • 20-inch bar for cutting larger stock and greater flexibility.
  • Engine decompression valve for easier cord pulls and quicker starts.
  • Easy-access heavy-duty air filter for quick maintenance.
Check Stock

TUXING 4500Psi 300Bar High Pressure Diving Compressor Gasoline Drive for Scuba Breathing Snorkeling Water Sport Paintball

  • 【Specification】This is a gasoline-driven compressor，Flow Rate: 100L/min / 3.5cfm..
  • 【Four stage cylinder air compressor】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
  • 【Gasoline Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter etc, the Lubricate Oil we recommend that Food grade lubricants.
  • 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
  • 【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check Stock

XtremepowerUS Pro Aluminium Air Compressor Pump 3 HP 11.5CFM 145PSI Pulley

  • Air compressor pump is widely used for chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research and other requirements of high-quality compressed air sector.
  • The air compressor head motor with proven belt driven design is greatly for excellent compression and smooth running.
  • Twin cylinder air compressor pump has a cast iron crankcase and aluminum head and valve plate to dissipate heat.
  • Observing the oil viewing window, it can monitor the oil capacity inside the machine in real time, and control the amount of oil when you adding the air compressor oil.
Check Stock

PROLUBE GP2/ST/501/N 50:1 Ratio Air Operated Grease Pump | for 16 Gal. Pails | with Drum Cover, Follower Plate, Hose, Z-Swivel, Control Valve | Built for Tough and Frequent Use (45416)

  • Industrial air-powered grease pump with 50:1 grease to air ratio.
  • Fully CNC machined, wear-resistant all-metal construction designed for heavy workloads.
  • ideal for use in industry, workshop, farm, construction or as part of the mobile greasing system.
  • Grease is driven by a reciprocating piston-operated 2.5" (63mm) diameter air motor, facilitated by an 84" high pressure hose (threaded ¼” Male) and Z-swivel (threaded ¼” x ¼”), and delivered by a trigger-pull Grease control valve (threaded ¼”).
  • Comes complete with drum cover, rubber-lined follower plate, hose, z-swivel, and professional grease control valve.
Check Stock

Kazeffi Synchron Motor 24V 4RPM Replacement for Honeywell Motor 802360JA，Used in V8043/8044 Zone Valve Control

  • 【Higher Performance】:802360JA Zone Valve motor Adapt to Honeywell zone valve motor V8043/V8044 . This Zone Valve Motor 24V, 4rpm at 50/60HZ. Cable....
  • 【Save time and money】:This Replacement motor for v8043 zone valves motor Easy to install. No need to replace brand new actuators or other HVAC....
  • 【High Quality】:Quality tested for over 100K cycles for flawless operation,Metal gears can be perfectly compatible with Honeywell V8043 or V8044....
  • 【More Applicable Scenarios】:802360JA can be replaced: HVAC damper control motor, Actuator Zone Valve motor etc. After many professional debugging,....
  • 【After-sale service】:100% after-sale guarantee, if you have any dissatisfaction with the product, you can ask for a replacement or a full refund.....
Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

  • The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
  • Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
  • Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
  • WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
  • WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...3.0 Inch Electric Exhaust Cutout Valve Kit fit for all types of vehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can ....
Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

  • DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
  • MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
  • MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
  • EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
  • MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.
Check Stock