Reviews Pulley Driven Fans

Belt Drive No More 415 Chain for 2 Stroke 66cc 80CC Engine Motorized Bicycle

  • Package include: 1 x Drive Pulley Diameter: 39mm (11-12T sprocket equivalent) 1 x Rear Wheel Pulley Diameter: 190mm (50T sprocket equivalent) 1 x T-Belt Type: 5M-1350.
  • Smooth acceleration: The T belt has the advantage of putting down the torque of the engine much more smoothly and gradually than the chain drive counterpart. Using a belt driven motorized bike you won’t feel a sudden tug when you twist the throttle, just smooth acceleration..
  • Easy to maintain and clean: T-belts also do not accumulate dust or dirt and need far less maintenance - like lubrication - when compared to chain driven design..
  • Little noise: No more noisy metal chain. The belt driven design emits very little noise while in use..
Check Stock

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

  • The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
  • Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
  • Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
  • Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
  • For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

Mophorn Torque Converter CVT 2HP-7HP 3/4' Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt

  • Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life..
  • Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter..
  • Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems..
  • Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes..
  • Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware..
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90

  • Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
  • In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
  • The fan clutch wrench removed the lock nut on the hot-tack fan..
  • The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock

AlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts

  • This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
  • Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock