Reviews Mono Amplifier For Subwoofer

Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02

  • ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it..
  • ❤【Home Hi-Fi amplifier】Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound.
  • ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer..
  • ❤【Mini Compact but Powerful】Built-in low pass filter for subwoofers with sub frequency control, small simple compact design but practical and powerful.
  • ❤【High Quality After-sale Service】 With 18 months warrenty and 24 hours after-sale service online to provide you the great shopping exprerience..
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Make Me Yours (Billionaire's Sub Book 2)

  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

Pyramid BNPS122 12' 1200W Car Audio Subwoofer with Neon Accent Lighting and 4 OHM Impedance, Sub Box,1100W Mono Amplifier, & Wiring Kit

  • SUBWOOFER: The Pyramid BNPS122 12" dual car audio subwooofers with a built in neon accent lighting, specially treated black rubber edge suspension, and bandpass alignment for extra deep bass..
  • MONO CAR AMPLIFIER: The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts.
  • AMPLIFIER KIT: This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car..
  • SUBWOOFER BOX & SPECIFICATIONS: Plexi Glass Front Window.
Check Stock

Pyramid BNPS102 10' 1000W Dual Car Speakers with Neon Accent Lighting and 4 OHM Impedance, Subwoofer Box, 1100W Mono Amplifier, and Amp Kit

  • SUBWOOFER: The PYRAMID BNPS102 Dual 10'' 1000 Watt Bandpass System with Neon Accent Lighting.
  • MONO CAR AMPLIFIER: The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts.
  • AMPLIFIER KIT: This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car..
  • SUBWOOFER BOX & SPECIFICATIONS: Plexi Glass Front Window.
  • DIMENSIONS: 10 7/16" (W) x 2 1/4" (H) x 9 1/8" (L).
Check Stock

Monoprice Above Fireplace Height Adjustable Swivel TV Pull Down Mantel Wall Mount for LCD LED Plasma Screen Displays 40 Inch to 63 Inch, Maximum weight 70lbs

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Rockville Destroyer 15D2 15 inch Competition Car Subwoofer+Mono Amplifier+Amp Kit

  • Package Includes: (1) Rockville Destroyer 15D2 15" Competition Car Audio Subwoofer w/USA Voice Coils!. (1) Rockville dBcomp4 Competition Mono....
  • Features of DESTROYER 15D2: Rockville DESTROYER 15D2 15" Dual 2-Ohm Car Subwoofer. Peak Power Handling: 8000 Watts. Program Power Handling: 4000....
  • Amplifier Kit Key Features of RWK0CU: 0 Gauge Power Amplifier Installation Kit. Designed specifically for car audio systems over 1000 watts RMS to....
  • Features of dBcomp4: Rockville dBcomp4 Competition Mono Amplifier 3000w RMS Dyno-Certified! Car Audio Amp. Dyno Certified RMS Power Ratings:....
Check Stock

Kicker 44TCWC102 10 600W Subwoofer + Box + Boss R1100M 1100W Amp + Amp Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car's sound system with this complete amplified bass package bundle that includes: 10" subwoofer, an enclosure, a....
  • CAR SUBWOOFER: This Kicker 2-ohm subwoofer boasts 600 watts max power and 300 watts RMS.
  • CAR AMPLIFIER: The Boss AR1500M Armor Series 1500 Watt Mono Car Amplifier delivers 700 watts RMS at 4 ohms to power your subwoofer. It includes a....
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with sturdy MDF construction and charcoal gray carpet.
  • AMPLIFIER KIT: Install your amp with ease with the competition quality 8 gauge kit that is included in this package.
Check Stock