Reviews Subwoofer Plate Amplifier

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

KICKER (2) 44L7S152 15" 4000 Watt Solobaric L7S Subwoofers+Amp+Sub Box+Wire Kit

  • Package Includes: (2) Kicker 15" Car Subwoofers. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. (1) RockvilIe dB15 6000 Watt/3000w RMS Mono Class D 2 Ohm Car Audio Amplifier. (1)Engauge by Memphis KIT0 0 Gauge Amplifier Amp Installation Wire Kit 17 ft. RCAs. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features:.
  • Kicker L7S152 15" 2000 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S15-4. Dual Two-Ohm Voice Coils. Injection-Molded Polypropylene Cone. Patented Corner Ribs Minimize Distortion. SoloKon 360-Degree Back Bracing. Ribbed Santoprene Surround With Blue Surround Stitching. UniPlate Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management. Thick Tinsel Leads. Large Ceramic Magnet. Cast Aluminum Basket. Satin-Nickel Plated, Spring-Loaded Speaker Terminals.
  • The Solo-Baric L7S 15-Inch Subwoofer works best with a sealed or ported enclosure and 1,000 watts of recommended power. See below for more details. Specifications: Size: 15" (38.1 cm). Impedance: 2 Ohms DVC. Max Rec Amplifier Power: 2000 Watts Peak / 1000 Watts RMS. Sensitivity: 89.4 dB 1w/1m. Frequency Response: 18Hz - 100Hz. Moun....
Check Stock

RCA RT151 Home Theater System

  • 80W surround system with five speakers and amplifier/subwoofer.
  • Amplifier, audio jacks and controls are built into the subwoofer.
  • two sets of RCA-type audio inputs on rear.
  • Compatible with DVD/CD players, computers and game consoles, satellite/cable boxes and most TVs.
  • Line-in audio jack on front - for iPod and other portable audio players.
  • 80W surround system with five speakers, subwoofer, and amplifier.
  • Compatible with DVD/CD players, computers, game consoles, satellite/cable boxes and most TVs.
  • Line-in audio jack on front for iPod and other portable audio players.
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Klipsch RSA-500 500W Multiple Use In-Wall Subwoofer Amplifier (Each)

  • The Klipsch RSA-500 is a single channel amplifier designed to power a passive subwoofer (a subwoofer that has no internal amplifier).
  • Primarily designed for use with the Klipsch RW-5802 and RW-5101-C in wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.
  • This amplifier pumps out 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules).
  • The RSA-500 offers standard input/output connectivity that will support any type of system.
  • Rack ears are included for fast and secure placement into any standard 19-inch rack.
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Kicker 44TCWC102 10 600W Subwoofer + Box + Boss R1100M 1100W Amp + Amp Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car's sound system with this complete amplified bass package bundle that includes: 10" subwoofer, an enclosure, a....
  • CAR SUBWOOFER: This Kicker 2-ohm subwoofer boasts 600 watts max power and 300 watts RMS.
  • CAR AMPLIFIER: The Boss AR1500M Armor Series 1500 Watt Mono Car Amplifier delivers 700 watts RMS at 4 ohms to power your subwoofer. It includes a....
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with sturdy MDF construction and charcoal gray carpet.
  • AMPLIFIER KIT: Install your amp with ease with the competition quality 8 gauge kit that is included in this package.
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

On Air

  • STURDY DESIGN: Underseat vented subwoofer features a die-cast enclosure, 2 passive radiators, and a Class D amplifier.
  • OEM INTEGRATION: Underseat car subwoofer includes high and low-level inputs with hi-level sensing for OEM integration.
  • AMPLIFIER INCLUDED: 150-watt RMS amplifier provides a strong bass, adding thump and intensity to any speaker system.
  • REMOTE CONTROL: Bass knob remote control included to easily adjust the subwoofer's settings.
  • SPECIFICATIONS: Features a blue LED illuminated Tarantula logo.
Check Stock

Eye in the Sky 35th Anniversary Edition Blu-Ray Audio

  • 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer....
  • Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB.
  • Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included.
Check Stock