Reviews Mold resistant Cables

SCSI II cable, HPDB50 (Half Pitch DB50) Male to DB25 Male, 19 Twisted Pairs, 6 foot

  • HPDB50 Male / DB25 Male, Mold, 19 Pair, 6 ft.
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Legrand - On-Q CPT306W-V1 in-Wall TV Power & Cable Management Kit, Hides Power & AV Cables for Clean, Clutter-Free Installation

  • FLEXIBILE INSTALLATION: Gives you the freedom and flexibility to install any TV, anywhere in your home.
  • HIDES CABLES: Neatly conceal power, HDMI, coax and Cat5e behind the wall for a clean, uniform and expandable home solution.
  • UNIVERSAL COMPATIBILITY: Works with all TV brands CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • KIT INCLUDES: Power Output Module (includes 6 ft. pre-wired cord), Power Input Module, Drywall Bracket, 6ft Power Cord, and cut-out Template with complete instruction guide.
Check Stock

Lincoln Electric KH538 Lug/Cable Crimping Tool Pack of 1 ,Black

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180°....
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock

AMZCNC 10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

3D Dragon Silicone Mold Soap Mold Candle Mold Fondant Mold Jewelry Ornaments DIY Bar Craft Homemade Resin Mold

  • 【Material】Made of premium silicone, flexible, resistant to tearing, easy to clean. Resistance to temperature -40-230 degree....
  • 【Size&Weight】Mold Size:9*12.5*6.5cm(3.54*4.9*2.56inch),Product Finished Size:7.5*11.5*6cm(2.95*4.53*2.36inch),Mold Weight:450g(15.87ounce).
  • 【Easy to Release and Clean】The flexible resin silicone mold is easy to remove. Once you're done, you can simply push the finished product out of....
  • 【Reusable】This re-usable resin casting mold set is a good choice for you to share your handicraft with your friends and family, enjoy your happy....
  • 【Widely Use】It's Suitable for soap mold, candle mold, fondant mold ,Jewelry Ornaments, bars and homes retro decor,DIY, etc..
Check Stock

Spiral Shape Cylinder Candle Mold, 1.35''x6.04''Inch Durable Plastic Candle Mold Supplies for Wedding Dinner Candles Making

  • High Grade Plastic Material: Plastic candle mold is made of extremely durable plastic which will last a lifetime and can withstand frequent usage due to its resistance to high and low temperatures..
  • Candle Mold Size : 1.35''*6.04''Inch/3.45*15.35cm, Make your own candle for any occasions - from decorating your dinner table to a wedding..
  • Spiral Shape Cylinder Ｍold: Resistant heat material and high transparent, excellent in allowing the colors of your dyed wax to be seen..
  • How to Take It Out: Tips 1: Notice: after filled the candle mold and wait it to harded, make the molds Freezing at -4℉ in the refrigerator for 15 minutes, It will be easier removal of the contents once it has set. Tips 2: Before pouring the beeswax into the mold, coated the inside of the mold with a thin layer of coconut oil..
  • Wide Application: This mold can be used for paraffin, wax, Palm Wax, beeswax candle making.
  • Any wax works in this amazingly easy mold..
Check Stock

AMZCNC Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (Crimping Tool)

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Geometric Candle Holder Concrete Mold Candlestick Silicone Mold Flowerpot Cement Clay Mould Fondant Cake Baking Mould

  • MaterialMade of premium silicone, flexible, resistant to tearing, easy to clean. Resistance to temperature -40-230 degree centigrade(-104F446F).
  • Easy to use and releaseSimply pour your favorite ingredients in the mold, and keep the ingredients static until completely formed. This flexible silicone mold has a non-stick surface that allows the finished product to be easily ejected by gently pushing it out from the bottom..
  • Easy to clean and storeThis silicone mold is completely dishwasher safe. Or wash directly with warm soapy water. After cleaning, put the mold in a storage space away from direct sunlight until the next use..
  • Size and WeightMold Size:8.2x8.2x6.1cm(3.23x3.23x2.4in),Product Finished Size:4.9x4.9x4 cm(1.93x1.93x1.57in),Mold Weight:265g(9.35oz)..
  • Widely UseThe resin mold can be used for handmade candle making, soap making, baking,cake, candy,fondant decoration,art crafts,etc..
Check Stock