Reviews Mining Cables

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

VTRETU 2000W Mining Power Supply 2U Miner PSU 110-264V for ETH Miner Machine, Support 8 GPU Mining rig, with 12000 RPM Powerful Fan (10 Connection Cables and 1 Power Cord Included)

  • 1, Rated Power 2000W: High power mining PSU with 8（6+2）Pin connection cords 12V output , work under full voltage （110V -264V ）. Hight efficiency with more than 80 %. Please reasonably calculate the consumption of the GPUs and reserve 300-400W for the motherboard and other cables..
  • 2, Wide Applicability: applicable to any GPU miners, stable and efficient, offering your system more reliable and stable output voltages. Note: The power supply cannot be used for ASIC miners with protocols or software..
  • 3, High-speed Cooling Fan: The 2U mining power supply uses a 60mm diameter cooling fan, up to 12000 rpm, which maximizes the heat dissipation effect. Compatible with the balance of quality, efficiency, and stability, pursuing continuous power output with high efficency but low consumption!.
  • 4, Configurations: 10 connecting cables, 8 (6 + 2) pinx16, 6pinx6, and 1 Power Cord. Cables are made with all-copper lines, providing multiple power protections against over current/over voltage/voltage regulation/short circuit/lightning/overload.
  • 5, Warm Tips: Professional power supply for min....
Check Stock

Mining Rig Frame - 12 GPU Steel Open Air Miner Mining Computer Frame Rig Case for Crypto Coin Currency Bit Coin ETH ETC ZEC Mining Accessories Tools - Frame Only Fans & GPU is not Included

  • ▶▶▶【Slot】12 GPU slots. (GPU is not included). 12 card spacing is 61MM. The length of the graphics card is unlimited..
  • ▶▶▶【Easy to install】Easy to install and strong structure. Keep all cables clean and organized, along with everything in your mining machine..
  • ▶▶▶【High Quality Material】The open air mining frame case made up of the highest quality stainless steel material, strong, durable and....
  • ▶▶▶【Perfect Design】Professional design for mining rig frame, accelerating the air convection, super cooling design for heat dissipation.....
  • ▶▶▶【Note】The Frame Only, Not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed with this Miner,....
Check Stock

Michal Tech Mining GPU Hanger Frame for Wire Rack Pack of 2 (2 Pack)

  • PROFESSIONAL VARIATION – Heat resistant for complete open air system and for enclosed systems!.
  • SIMPLE and CONVENIENT – Compatible with almost all wire racks.
  • EASY TO INSTALL – This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on a mining frame. For installation steps, please refer to the user manual..
  • Full kit includes set of 2 screws and 2 hangers..
  • NOTICE – GPU’s with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU, GPU, PSU, Motherboards, Cables, etc.. If you are not 100% happy with this product, please feel free to contact us, we will offer you a satisfactory solution within 24 hours..
Check Stock

PCIe Riser Powered Adapter Card 1X to 16X, PCI-E GPU Risers 8 Capacitors for Bitcoin Litecoin ETH Coin Mining with Led Graphics Extension +60cmUSB 3.0 Cable and 6-Pin SATA Power Cable (VER009s-6Pack)

  • ... the PCI Express X16 slot ensure stable GPU connection. What's more, it can extend the mother board PCIE X1 slot to PCIE X16 slot and will provide more safer and reliable connectivity with more PCIE X16 graphic cards..
  • 【Strong Stability for You】 The 009s gpu riser come with 24 inches USB 3.0 pcie extension cable mining.The PCI-E connector uses multi-layer shielded wire, which can be connected up to 300cm without signal attenuation. Equipped 15Pin SATA to Molex 6Pin power cable that can provide adequate current for Ethereum Mining rigs and GPU Mining rigs..
  • 【8 Capacitors, More Safer】This high quality pcie riser splitter mining is equipped with 8 upgraded FP solid capacitors which make the graphics card power supply more safer and stable. It is excellent choice for mining rigs..
  • 【Support System】: Compatible with all WINDOWS systems, LINUX, MAC.--Plug and play, no driver needed to install. (Bonus: 6*pcie riser adapter cards, 6*PCI-E 1x Golden Fingers , 6*60cm USB 3.0 cables, 6*6Pin to15Pin SATA power cables.）.
  • 【Reliable Support】 Buy with 90 days warranty. PCI-Express GPU riser kits have been tested for functionality and durability by the third parties before sent it to you. If you have any questions, please feel free to contact us, we will....
Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

  • PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
  • COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
  • supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
  • EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
  • RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
  • IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • 【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....
Check Stock

SUOHUI Complete GPU Mining Rig Open-air Crypto Miner for Ethereum Mining Prebuilt 8 Slots Mining Motherboard,1800W PSU,4 Cooling Fans, 8GB RAM,128GB SSD, Win10 OS(Excluding GPU/1 Layer Miner)…

  • 【Professionally Installed and Test 】 This stackable miner is sturdy and durable with high-quality steel.Unique bottom plate not only for dust-proof and moisture-proof but also accelerate air convection and enhance heat dissipation. Fully protection for your GPUs and mining hardware..
  • 【8 GPU Mining Motherboard 】 Professional mining motherboard, designed for cryptocurrency mining. 8 NVIDIA or AMD graphics cards can be mixed use without additional GPU risers. 65mm spacing slot perfectly fits most GPUs and achieves high heat dissipation. Ensure better performance of GPU mining..
  • 【1800W Full Voltage Power Supply】 4U industrial control power supply, designed for GPU mining. The stable output of 1800W high power and conversion up to 90%. Available at 110V and 220V. 10 long-line power connection cables directly connect to the motherboard and GPUs. Reduce power loss and extend service life..
  • 【Ultra-quiet Controllable Cooling Fans】The mining machine has installed 4*4500 RPM silent GPU cooling fans and a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. The professional mute design lets you easily enjoy the fun of mining at home..
  • 【Warmly Notes】: After receiving the miner, you need to conne....
Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • 8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
  • 2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
  • Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
  • Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
  • Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....
Check Stock

WOOCHOO Mining Rig Frame - 6/8 GPU Steel Open Air Miner Computer Case for Crypto Coin Currency Bit ETH ETC ZEC Accessories Tools，（Fans & is not Included） black 53.4 x 29 4.4 cm

  • 【Slot】6/8 GPU slots. (GPU is not included). The length of the graphics card is unlimited..
  • 【High Quality Material】- The frame was made of high quality material, with the finest craftmanship. Strong & durable, fully protection to your....
  • 【Perfect Design】Perfectly fit ATX motherboards, up to 8 graphics cards, hard drives, and power supplies. Professional design for mining rig frame,....
  • 【Easy to install】- The Open Air Miner Mining Frame Rig Case has precise screw holes and easy installation. You can quickly complete the layout of....
  • 【Notice】This mining rig frame is the Frame Only, not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed....
Check Stock