Reviews Milling Insert

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Carbide Milling Inserts TPCN32PDTR TPG32 Mutilayer Coated Carbide Turning Inserts for indexable End Mill,10pieces/Pack

  • TPCN32PDTR（TPCN1603PDTR） Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle..
  • Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • For turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chipbreaker.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

QWORK Turning Inserts, 4 Pcs Turning Tool Internal Turning Bar Holder with 10 PCS DCMT21.51 Indexable Carbide

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning.Very suitable for steel..
Check Stock

OSCARBIDE 3/4\ Shank Lathe Turning Tool Holder MTJNR12-3C,5\Overall Length,Right Hand with TNMG332 Insert,93 Degree,1 Pieces

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning.Very suitable for steel..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm（1/2"）.
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock