Reviews Mifare Door Lock

RFID Reader 13.56Mhz Mifare USB RFID Reade As Keyboard Input for Raspberry pi Linux Android Win Mac iOS + 3Pcs Card

  • .Mifare IC card USB reader, Send data to cursor location, HID USB no driver is requested.
  • .Mifare card reader supports Mifare Ultralight/ Nano/EV1/C,Mifare Classic EV1,Mifare Plus S/SE/S/EV1,Mifare Desfire EV1/EV2,N-TAG Card Emulation.
  • .Support 4 byte UID and 7 byte UID mifare 13.56M card.
  • .Emualte USB keyboard output, so easy interfaced into RFID system without changing the original software or program, selectable 28 formats are suitable for most common system.
  • .Default setting is 8H 10D format, Send card data in 10 digital datas to focused window as an external input device.
Check Stock

Getmorv 100PCS 13.56MHz RFID Key Fob ISO14443A Proximity IC Card Token Tag for Electronic Door/Cabinet Lock Compatible with MIFARE Classic 1K Card M1 Read Only

  • Note: These are 13.56MHz key fobs (tags), according to ISO14443A. If you want to register them to your lock system, please ensure that your system uses the same frequency 13.56MHz. Incompatible with other frequencies like 125kHz..
  • Read only. Not re-writable. Each key fob is already pre-programmed. You cannot re-program them by a card writer..
  • Compatible with MIFARE Classic 1K Card (M1 Card). If your lock uses M1 card, these key fobs can work for your lock..
  • Suitable for 13.56MHz RFID proximity access control system and ID management system. For example, register them to your RFID door lock as new keys if applicable..
  • Approx. Fob Size: 1.58*1.26*0.18 inch. Casing Material: ABS Plastic. Color: Blue. Package includes 100 PCS..
Check Stock

4 Doors Access Control System Core Control Components with Metal 5A 110V-240V Power Supply Box and Four Doors TCP/IP Network Access Control Panel Wiegand Controller,Computer Based Software,remote open

  • Control 4 doors, get in door by swiping card, get out door by exit button or by swiping card,support 4 readers.Can Store/download/check Entry Detail records..
  • User capacity: 20,000 user, record capacity:100,000. Auto open/close at any pre-set time during any day. Support "who" can enter which door at certain time, authorized access control.Also support swipe 4 times continuously to keep door open..
  • Record never lost in case of power failure.The power supply box with 110-240V input, 5A output, powers the whole system,also act as the cabinet for the control board.Input format of reader Wiegand 26/Wiegand34 (all card reader with compatible protocol, RFID/Mifare/HID)..
  • Network communication via TCP/IP. Software supportable database: access & SQL server. Support win7/win8/win10 both 32 and 64 bit system..
  • This is Core part of a complete access control system, if you need full kits for lock/reader/exit button, etc,contact us freely, we have 20 years experience..
Check Stock

Samsung RFID Sticky Key for Samsung Door Locks Quantity 4 + 1 RFID Card

  • Bundle for 4 RFID sticky keys and 1 RFID card.
  • Works with ALL Samsung digital door locks..
  • The RFID sticky keys, tags, or cards can be programmed to open multiple door locks. One key to rule them all (your Samsung door locks that is)..
  • The sticky key is super thin and has a pretty strong adhesive. The most common place to use a sticky key is on the back of a phone. RFID card is exact....
  • [ RF ID ] 13.56MHz ISO14443 A Type Mifare.
Check Stock

ID Card Reader Writer Copier Duplicater for Access Control+5 PCS EM4305/T5557 Tags+ Copier Tool No Driver Software

  • 13.56 Mhh support mifare 1k, ntag213, ultralight /ultralightc, Mifare plus, Mifare desfire.
  • 5 pcs ntag213 nfc tag samples and 2 pcs UID MF1 card.
  • IEC14443A and ISO18092 protocol compliance.
Check Stock

FONGWAH NFC RFID Reader Smart Card Reader Writer Comply with ISO 14443 A and ISO 7816 Support Mifare Card and Contact Smart Cards with Testing Cards and Free SDK provided for The Second Development

  • NFC reader RFID reader writer S9-BU-13-00 with USB(plug&play) interface.
  • RIFD reader writer support read write contactless cards: MIFARE Classic (S50/S70) ,MIFARE DESFire, MIFARE Pro、MIFARE Ultralight,etc.but it doesn't....
  • smart card reader writer also support read write ISO7816 contact cards like sle4442,44428,5542 cards.Not support read 125khz ID card or HID card..
  • [Very Important Point]:S9 reader is not support all RFID cards,tags.before place the order,please refer to the SDK first.For any technical question or....
  • [Extral service]:if need the reader function just to read card UID like use keyboard emulation output format,please contact us to get the firmware to....
Check Stock

Gialer 50 Pack MIFARE 1 Classic 1K RFID Smart Intelligent Card ISO 14443A 13.56MHZ Blank Smart IC Card Contactless Hotel Key Cards Access Control Card Sublimation Printable

  • [Chip] - FUDAN FM11RF08 compatible MIFARE Classic 1K 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,MIFARE and MIFARE Classic are trademarks of NXP B.V..
  • [Printable and Compatible] - Printable on all ISO Standard Desktop Photo ID Card Printers(NOT Use for INKJET Printers): Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. Can NOT work with HID,Salto and Assa Abloy Locks systems.
  • [Programmable] - All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF..
  • [Reading Distance] - There is Mifare Class Chip inside of card via lamination.it's contactless with 1-10 cm reading distance(based on the reader)..
  • [Standard Credit Card Size]- 3 3/8" x 2 1/8" (85mm*54mm) Standard Credit Card Size (CR80 30 Mil),each card individually OPP bag packed. Blank white both sides(no printed numbers, no magnetic strips and no slots or holes).-.
Check Stock

Smart Chip EMV SIM eID Card Reader Writer Programmer with 5pcs Blank Programable LTE USIM 4G Card + SIM Personalize Software Black

  • #1. No software provided. You have to get a third-party application/software to work with it by yourself. It is professional hardware. If you are not....
  • USB interface. CCID standard. PCSC compliant..
  • Read/write speed up to 424 kbps. Card reading distance of up to 50 mm (depending on tag type)..
  • Frequency: 13.56MHz. Support ISO 14443 Type A and B, Mifare, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags..
  • Support new Mifare Ultralight C (via pseudo APDUs) and Mifare Plus SL1 (4 Byte UID, via pseudo APDUS) and SL3..
Check Stock

ETEKJOY ACR122U NFC RFID 13.56MHz Contactless Smart Card Reader Writer w/USB Cable, SDK, 5X Writable IC Card (No Software)

  • #1. No software provided. You have to get a third-party application/software to work with it by yourself. It is professional hardware. If you are not familiar with it, don’t buy. #2. It works for frequency 13.56MHz only. It doesn’t work for other frequencies..
  • USB interface. CCID standard. PCSC compliant..
  • Read/write speed up to 424 kbps. Card reading distance of up to 50 mm (depending on tag type)..
  • Frequency: 13.56MHz. Support ISO 14443 Type A and B, Mifare, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags..
  • Support new Mifare Ultralight C (via pseudo APDUs) and Mifare Plus SL1 (4 Byte UID, via pseudo APDUS) and SL3..
Check Stock

YARONGTECH MIFARE Card 13.56mhz ISO14443A Plastic White Card (Pack of 200)

  • MIFARE Classic 1K Card operates at 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,but UID can’t change,uid is not rewritable,MIFARE and MIFARE Classic are trademarks of NXP B.V..
  • These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. But they can NOT work with HID,Salto and Assa Abloy Locks/Systems,Amiibo and Tagmo, etc..
  • All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF.
  • They are credit card size,each card individually OPP bag packed. Blank white both sides(no printed numbers, no magnetic strips and no slots or holes).
  • Printable on all ISO Standard Desktop Photo ID Card Printers(NOT Use for INKJET Printers): Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.All the Package has YARONGTECH Brand sticker to make sure you buy our brand cards.
Check Stock