Reviews Metal Clamps

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

Gorilla Gripper 'GP' 0 to 3/4\ (0 to 22mm)

  • 【High Quality】Stone carrying clamps is designed with heavy-duty solid metal construction and made of high quality aluminum, A3 steel and rubber. These high-quality materials make the carrying clamps more durable and not easily deformed..
  • 【Powerful Carrying Capacity】Granite carrying clamps load up to 660lb/300kg. Opening: 0-2.36in/60mm. The carrying clamps help you to work more efficiently on jobs. These may be used alone or in conjuction with other pairs to move small or large pieces with ease..
  • 【Non-slip Handle & Rubber Pads】The stone lifting tools have fully vulcanized rubber pads which provide added grip and prevent damage to your materials.The non-slip handle make transporting more safer, ergonomically design make it more comfortable to hold..
  • 【Widely Application】The double handed carrying clamps is used for lifting and transporting stone slabs,sheets of glass,granite island marble soapstone,metal sheet,plywood etc.Can be used for rough and smooth surfaces..
  • 【100% Guarantee】Our granite lifting tools come with one year warranty and 24 hours online service. For any reason if you don't like. You will receive a full refund..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Rhino Rack 2500 Roof Rack Pad & Clamp Kit, DK438, Set of 4, Small

  • Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps..
  • Used to replace the pad and clamps on Rhino-Rack's 2500 two bar roof rack systems.
  • Strong anti-corrosive black metal clamps.
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • §【Free Your Hand】: The problematic miter joint projects still annoy you? Innovative 90 degree corner clamps make setup more manageable with L-shaped jaw that can clamp different pieces simultaneously, saving your time and freeing your busy hands without requiring more aligning and turning..
  • §【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different ....
Check Stock

Metal Clips for Rope, Cord, String - Heavy Duty Zinc Plated Double Rope Clamps (1 Inch, 10 Pack)

  • ZINC CLIPS WITH LUXURY FLAIR: The attractive zinc plated color of Paracord Planet’s rope clamps give them an ultra-stylish finish and chic appearance. Easy to use, and efficient, our rope clamps can effectively clamp all rope, and other cordage, within a wide range of sizes. The 1-Inch size fits two 1/2-Inch ropes, the 1/2-Inch size fits two 1/4-Inch ropes, the 3/4-Inch size fits two 3/8-Inch ropes and the 5/8-Inch size fits two 5/16-Inch ropes..
  • MULTIPURPOSE ROPE CLAMP: Our rope clamps work great both indoors and outdoors. Use them to create animal and pet leashes, leads for horses, fender lines, keychains, or use on your boat, dock, and other marine environments. Our clamps will hold up extreme weather conditions, meaning they work great for sprinklers and flagpoles as well. The possibilities are endless with Paracord Planet Metal Rope Clamps..
  • MULTIPLE PACK OPTIONS: Available in 2-Pack, 3-Pack, 5-Pack, and 10-Pack options. Our rope clamps come in an attractive zinc platted color and are available in multiple size options including: 1-Inch (fitting two 1/2-Inch ropes), 1/2-Inch (fitting two 1/4-Inch ropes), 3/4-Inch (fitting two 3/8-Inch ropes), and 5/8-Inch (fi....
Check Stock

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock