Reviews Clamps

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

WINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps

  • Premium Materials: WINL hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: WINL stainless stee....
Check Stock

16 Pack 3.5 Inch Spring Clamps-Black Spring Plastic Clamps for Backdrop Stand,Backdrop Clips Clamps,Heavy Duty for Crafts Woodworking Photography Studios Outdoor

  • Package:16pcs 3.5 inch small spring clamps heavy duty.The dimensions of these backdrop clips clamps is 3.5"x2.9".Heavy duty spring clamps for versatile use in crafts, DIY projects, and photography.Whether you're a professional photographer or a hobbyist, these backdrop clamps are essential for achieving a seamless backdrop display..
  • High Quality:The small heavy duty clamps is made of durable nylon plastic with two flexible pads.The rugged construction of these spring clips for backdrop stand can help clamp items firmly and lasting performance for longer life..
  • Excellent Design:The pads in the heads of heavy duty clips are designed to be soft and flexible to protect finishes and provide maximum flexibility and tension.The flexible orange pads of the small clamps for crafts can rotate different degrees to adjust different objects,can be removed.The plastic clamps have high strength spring whose force is about 3.5lbf clamps heavy duty..
  • Performance:The heavy duty clamps for backdrop stand have human engineering handle,anti-slip and reduce hand fatigue to better operation. The heavy duty clip is usually use for photography. And the backdrop clips clamps very suitable as wood clamps for gluing woodworking with the great bite forc....
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

60 Pcs Heavy Duty Snap Grip Hose Clamps 8 Kinds White Double Gripping Nylon Hose Clamps Assortment Kit

  • 【HIGH QUALITY】: Snap Grip Hose Clamps are all made of nylon engineering plastics. salt resistant,anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.
  • 【ADJUSTABLE RANG】: The adjustable clamps we provide is 6.6 - 7.0mm, 8.6 - 9.1mm,9.7 - 10.2mm, 12.3 - 14.0mm,13.8 - 15.4mm,16.3 - 18.1mm,21.5-23.5mm,25.5-27.5mm.
  • 【DESIGN】: The hose clamps designed as double grip of teeth, which provide more secure and firm grip. Easy to install, you can just press them with a tool.
  • 【ADJUSTABLE STYLE】: The clamps with two row of teeth, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted.
  • 【USEFUL SNAP CLAMPS】: These tubing clamp set total include 60pcs 8 size white double gripping hose clamps, which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings.
Check Stock

Ear Clamp Pliers, Pincer Crimper Tool, Single Ear Hose Clamps Pliers for Auto ATV UTV, Nail Puller for Securing Pipe Hoses, Front Jaw

  • MATERIAL: Ear hose clamps pincers are made of high-strength chrome-vanadium steel for durability and long-lasting, equipped with non-slip grip handles which is convenient for your installation..
  • WIDELY APPLICATION: Widely applied to install and remove single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses..
  • UNIQUE DESIGN: The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • EASY TO USE: Clamps can be installed quickly by using this pliers, it's designed for ear clamps. Not intended for Clic-R clamps..
  • WHAT YOU'LL GET: 1Pcs Ear Clamps Pliers is included in this package, same as the pictures, if you have any problem, just feel free to contact us!.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Hose Clamp Assortment Kit - 50PCS 1/4 –1 1/8 inch 304 Stainless Steel Worm Gear Hose Clamps for Fuel Line,dryer,Garden Water Pipe and Washing machine - 3/8 ,3/4,1/2,5/8Inch Hose Clamps

  • [Premium Quality] :The pipe clamps are made of 0.026'' thick premium 304 stainless steel with smooth edge. The stainless hose clamps are durable and have excellent corrosion and acid resistance, perfect for use even in harsh conditions.The hose clamps are reliable, strong, water proof and oil proof..
  • [Strong Tightening Performance]:The hose clamps are high torque,adjustable range, secure hold and smoothly drive. The average torque of the hose clamps is 9.5N and can hold well onto the hose and pipes for a very long time.Hose clamps have clamping range from 1/4 inch to 1 1/8 inch , perfect for 1/4 inch ,7/16’’,3/8’’,5/8’’,1/2’’,3/4’’,1’’,7/8’’ and 1 1/8’’ hose clamps..
  • [Easy Installation]:Our hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking, and strong torsion force. This worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs. This allows stainless steel hose clamps to provide a stronger tightening force and easier to install..
  • [Wide Applications]:Adjustable pipe clamps stainless steel is ideal for automotive, home, industry, gardening, machinery, electronics, marine, marine, etc. This clamp set contains wide inner diamet....
Check Stock