Reviews Fittings Clamps

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • ...mps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage. These stainless hose clamps are perfectly suitable for home, automotive, industrial, gardening, mechanical, electronic, boat, marine and more. These 1/2’’ hose clamps are perfect for seal hoses, water pipes, plumbing, pipes, fittings, cables, tubes, fuel lines, cars, trucks, SUV etc. for both indoor and outdoor use..
  • 【No Risk Purchase:】 You will get 20PK stainless steel hose clamps of size 10, 1/2'' hose clamps, 3/4'', 1’’ hose clamps.
  • If you are not satisfied with our hose clamps, we will offer free replacement or full refund, totally no risk purchase. Take action now!.
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

Hoshizaki 427443-05 Hose Clamp

  • 【NO EDGES OF SHARPNESS】-- These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • 【PREVENT FLUID LEAKAGE】-- Item Type: Hose clamp. Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
  • 【VERY TIGHT HOSE CLAMPS】-- Carbon steel color zinc plating. These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • 【HIGH QUALITY CARBON STEEL】-- Type: Elastic hose clamp. Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • 【EASILY ADJUSTED BY SCREWDRIVER】-- Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,5 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】5' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,10 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】10' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

Cambridge Worm Gear Hose Clamps SAE Size 24, Adjustable 1 1/16-in to 2-in, Stainless Steel Band and Housing, Zinc Plated Screw, 10 Pack

  • Premium quality hose clamps are easy to use and provide a tight and secure hold.
  • 1/2 inch band size minimum diameter 1 1/16 inch maximum diameter 2 inch exceeds 60 inch pounds of torque.
  • Cambridge hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings.
  • the standard hose clamps exceed 60 inch pounds of torque.
  • Cambridge hose clamps are the ideal choice for all forms of projects and applications requiring hose clamps.
  • Series 2300 hose clamps are designed with a stainless steel band and housing and a zinc plated screw making them more economical than clamps made only with stainless steel.
  • 10 pieces packed in a convenient storage box.
  • Cambridge performance driven high quality products are preferred by industry leaders.
Check Stock

100Pcs 6 22mm Hose Clamp Set Spring Hose Clamp for Pipes Tubes

  • Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
  • These gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
Check Stock

60 Pcs Heavy Duty Snap Grip Hose Clamps 8 Kinds White Double Gripping Nylon Hose Clamps Assortment Kit

  • 【HIGH QUALITY】: Snap Grip Hose Clamps are all made of nylon engineering plastics. salt resistant,anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.
  • 【ADJUSTABLE RANG】: The adjustable clamps we provide is 6.6 - 7.0mm, 8.6 - 9.1mm,9.7 - 10.2mm, 12.3 - 14.0mm,13.8 - 15.4mm,16.3 - 18.1mm,21.5-23.5mm,25.5-27.5mm.
  • 【DESIGN】: The hose clamps designed as double grip of teeth, which provide more secure and firm grip. Easy to install, you can just press them with a tool.
  • 【ADJUSTABLE STYLE】: The clamps with two row of teeth, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted.
  • 【USEFUL SNAP CLAMPS】: These tubing clamp set total include 60pcs 8 size white double gripping hose clamps, which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings.
Check Stock

Cambridge Worm Gear Hose Clamps SAE Size 20, Adjustable 13/16-in to 1 3/4-in, Stainless Steel Band and Housing, Zinc Plated Screw, 10 Pack

  • Premium quality hose clamps are easy to use and provide a tight and secure hold.
  • 1/2 inch band size minimum diameter 13/16 inch maximum diameter 1 3/4 inch exceeds 60 inch pounds of torque.
  • Cambridge hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings.
  • the standard hose clamps exceed 60 inch pounds of torque.
  • cambridge hose clamps are the ideal choice for all forms of projects and applications requiring hose clamps.
  • Series 2300 hose clamps are designed with a stainless steel band and housing and a zinc plated screw making them more economical than clamps made only with stainless steel.
  • 10 pieces packed in a convenient storage box.
  • Cambridge performance driven high quality products are preferred by industry leaders.
Check Stock

POWERTEC 70201 4-Inch Three-Machine Dust Collection Kit

  • Create your own 3-machine dust-collection network.
  • Tailor your dust-collection system to your specific needs and shop room specifications.
  • Includes two 45-degree elbow connectors, two Y-fittings, three blast gates and twenty 4-Inch key hose clamps.
  • Fittings and gates constructed of durable, rugged, anti-abrasion ABS plastic.
  • It is recommended to ground your assembly to eliminate static electricity when employing included fittings and gates.
Check Stock