Reviews Masonry Adhesive

PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 8 oz in Two Cans, Gray 70079

  • Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry.
  • Resists moisture and can be applied to both wet and dry surfaces.
  • Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F.
  • Non-sagging paste can be used on horizontal and overhead surfaces.
  • Can be painted, stained, and machined after fully cured.
Check Stock

3M 550 Polyurethane Adhesive

  • Polyurethane adhesive used as an elastic adhesive for paver caps, masonry veneer and faux stone.
  • PERFORMANCE: Fast hardening, waterproof and water immersible once dried. Can be used to fill in gaps and can be painted over water-based, oil-based, and rubber-based paints..
  • SUPPORTS: Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood..
  • DURABILITY: Good weathering resistance. High durability and flexible..
  • USES: Can be used for net tile installation, floor moldings and door sills, lightweight construction materials, wood or metal window and door frames.
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

  • Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

HY-C BBT1729K-10W BigTop Multi-Flue Chimney Cover, Black Galvanized Steel, 10" H x 17" x 29" - with Minimum 20" x 32" Required Overall Chimney Dimension

  • Attractive chimney cap for multi-flue masonry chimneys. Top-Mount design attaches easily and securely with included tapmark masonry screws and tube of all-weather construction adhesive..
  • Measures 17" x 29" from screen to screen. Requires a 20" x 32" masonry chimney top for 24-gauge galvanized steel base flanges to mount properly. Hood measures 22 1/4" x 34 1/2"..
  • 24-Gauge removable galvanized steel hood with scalloped corners and roll-formed edges allows for extra strength and easy cleaning. Attractive black powder coat finish helps it to stand up to the elements..
  • Made with 18-Gauge 3/4" galvanized steel expanded metal mesh. BigTop Multi-flue Chimney Cap acts as a spark arrestor to prevent most ascending sparks from reaching the outside..
  • Not recommended for use in situations where oil or coal is burned or when wood/pellets are used as primary source of heat. 7 Year Limited Warranty. Made in the USA..
Check Stock

Loctite Power Grab Express All Purpose Construction Adhesive, 6 fl oz, 1, Squeeze Tube

  • Professional and DIY: All purpose, instant grab adhesive dries white and is paintable for a professional finish.
  • Versatile For Interior Projects: Bonds to a variety of construction materials including wood, drywall, plaster, ceramic, concrete, masonry, brick, foamboard, cork and vinyl cove base.
  • Quick and Easy: Simply apply with caulking gun.
  • repositionable for up to 15 minutes and fully cures in 12 hours.
  • Instant Grab: Zero-second instant grab and high initial tack reduces need for nails, screws, and bracing.
  • Easy Clean Up: Uncured adhesive cleans up easily with just soap and water.
Check Stock

Loctite 1390595 Polyurethane Construction Adhesive, Single, Tan, 10 Fl Oz

  • All Purpose: One component polyurethane-based adhesive that covers a wide variety of projects and bonds to most materials for consistently successful results.
  • 3X Stronger: 3 times as strong as ordinary construction adhesives and stronger than many substrates it joins together.
  • Versatile: Ideal for sub floor installations and bonds to most common construction materials such as wood, OSB, drywall, brick, concrete, masonry, stone, foam insulation, metal, ceramic, PVC, and more.
  • Interior and Exterior: Paintable adhesive with no strong solvent odor that sets in 30 minutes and fully cures in 24 hours for projects inside and out.
  • Weather Resistant: Waterproof and can be applied directly to wet and frozen surfaces without shrinking and cures in cold temperatures.
Check Stock

KILZ Klear Primer, Interior/Exterior, Clear, 5 Gallon

  • ...ealer that helps protect topcoats from "hot" alkali found in masonry, cement and plaster and can be applied to fresh concrete with pH less than 13. Easy soap and water cleanup..
  • MULTIPLE SURFACES: Suitable for sealing torn drywall facing paper, dried wallcovering adhesive, ‘hot’ joint compounds, concrete and stucco. Use on interior and exterior surfaces including drywall, plaster, wood, galvanized, aluminum, architectural plastics, masonry and brick. Prepare surfaces free of dust, grease, chalk, rust and peeling paint. Works with oil, alkyd and water-based paints..
  • SUPERIOR COVERAGE: This 5-gallon pail of KILZ KLEAR multi-surface latex primer covers approximately 1,500-2,00000 square feet per gallon. Dries to touch in 30 minutes and can be recoated or topcoated after one hour..
  • KILZ primers have been trusted by pros for nearly 50 years! Famous for providing high quality primer products that provide solutions to a wide variety of painting problems, KILZ is consistently ranked as one of the most trustworthy brands in the architectural coatings market. Lifetime Limited Warranty (see label for details)..
Check Stock

SikaBond Construction Adhesive, Gray, Advanced polyurethane for outdoor. Water immersible & waterproof, 29 fl.oz

  • Polyurethane adhesive used as an elastic adhesive for paver caps, masonry veneer and faux stone.
  • PERFORMANCE: Fast hardening, waterproof and water immersible once dried. Can be used to fill in gaps and can be painted over water-based, oil-based, and rubber-based paints..
  • SUPPORTS: Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood..
  • DURABILITY: Good weathering resistance. High durability and flexible..
  • USES: Can be used for net tile installation, floor moldings and door sills, light weight construction materials, wood or metal window and door frames.
Check Stock