Reviews Masonry Nails

Gardner Bender GSE-4310 Steel Service Entrance Cable Staple, 1⅛ x 1⅜ Inch, Secures 4/3 and 2/3 SEC Cable Application, Graphite Metallic High-Carbon, 25 Pk.

  • Secures cat 5 and cat 3 UTP voice/data cable.
  • White plastic clip-on masonry staples (25-pack) feature uv-resistant polyethylene saddles for durability.
  • UV resistant polyethylene saddle will not rust, crack or deteriorate.
  • It is 25 Pack 1/2" Plastic Clip On Cable Staples.
  • With Masonry Nails For NM Romex Or UF Cable AWG 12/2 WG.
  • Polyethylene Saddles Zinc Plated Nails UV Protected Carded.
Check Stock

Concrete Nail Gun, Silencer Shot Nail Grab, Steel Nails Gun, Portable Nail Gun Set, Concrete Nailer With Case, Manual Fastening Tool for Cement Wall

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

cSeao 300pcs 20mm / 0.75 Inch Length Flat Nails for Picture Wall Hanging, Wood Nails, Common Nails Hanging Nails

  • 【】Most commonly used to fasten pieces of wood together, but they are also used with plastic, drywall, masonry, and concrete, hanging pictures..
  • 【】Suitable for nail heads embedded in wood, for floor nails, furniture nails, wood mold nails etc..
Check Stock

cSeao 80pcs Metal Cement Wood Sliding Nails for Wood Furniture 50mm 2 Length Common Nails Hanging Nails Picture Hanging Nails

  • Suitable for nail heads embedded in wood, for floor nails, furniture nails, wood mold nails etc..
  • Most commonly used to fasten pieces of wood together, but they are also used with plastic, drywall, masonry, and concrete..
Check Stock

2 Pack Mason Chisel with Hand Guard, Heavy Duty Flat Chisel with Hand Protection Flat End for Demolishing Carving Splitting Breaking Hounding

  • Flat Masonry Chisel made of heat-treated high carbon steel, resists rust..
  • This heavy-duty chisel is ideal for cutting/splitting/carving/demolishing brick, masonry, concrete and more..
  • Shock-absorb handle and hand protector provide great protections from overstrikes and missed hits..
  • Length: 11.7 inches. Blade Width: 1 inch. Designed for cutting, prying, and ripping nails and hardwood flooring.
  • The product is sprayed and treated, not easy to rust, the tail is made of a quenching process, resistant to knocking..
Check Stock

Firecore FS305P Masonry Chisel with Hand Guard, 12 inches Heavy Duty Pointed Chisel with Hand Protection, Concrete Mortar Stone Breaker Chisel for Demolishing Carving Splitting Breaking Cutting

  • Made of heat treated CRV Steel. Forged construction for hardness, durability. Forged and heat-treated ground point provides a concentrated force ideal for breaking large pieces of concrete ​floors, sidewalks, and paving slabs when impractical to use an air hammer..
  • Ergonomically designed soft handguard for easy and convenient use. Bright safety yellow handle absorbs shock while protecting hand, fingers, and knuckles from glancing blows..
  • Total Length: 12 in (30.5 cm), Handle Length: 5.4 in (13.8 cm), The Length of Chisel Rod: 6.4 in (16.3 cm), The Diameter of Chisel End: 0.16 in (0.4 cm), Weight: 1.4 lbs (0.65 kg)..
  • Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut. Round handle design provides a secure, comfortable grip that allows for easy tool positioning..
  • The heavy-duty masonry chisel is applicable for metalworking and masonry, Ideal for sculpture, cutting, splitting, carving, demolishing brick, masonry, concrete, prying, and ripping nails and hardwood flooring etc..
Check Stock

Firecore FS305F Masonry Chisel with Hand Guard, 12 inches Heavy Duty Flat Chisel with Hand Protection, Concrete Mortar Stone Breaker Chisel for Demolishing Carving Splitting Breaking Cutting

  • Made of heat treated CRV Steel. Forged construction for hardness, durability. Forged and heat-treated ground point provides a concentrated force ideal for breaking large pieces of concrete ​floors, sidewalks, and paving slabs when impractical to use an air hammer..
  • Shock-absorb soft rubber cover handle is non-slip. Easy to do heavy duty works and get precise cut. Round handle design provides a secure, comfortable grip that allows for easy tool positioning..
  • Total Length: 12 in (30.5 cm), Handle Length: 5.4 in (13.8 cm), The Length of Chisel Rod: 6.4 in (16.3 cm), The Diameter of Chisel End: 0.77 in (1.96cm), Weight: 1.4 lbs (0.65 kg)..
  • Ergonomically designed soft handguard for easy and convenient use. Bright safety yellow handle absorbs shock while protecting hand, fingers, and knuckles from glancing blows..
  • The heavy-duty masonry chisel is applicable for metalworking and masonry, Ideal for sculpture, cutting, splitting, carving, demolishing brick, masonry, concrete, prying, and ripping nails and hardwood flooring etc..
Check Stock

Heavy Duty Mason Chisel with Hand Guard, Flat End Chisels,Demolishing/Masonry/Carving/Concrete Breaker Chisels with Bi-Material Hand Guard+ A pair of gloves Green-2

  • Applicable for metalworking and masonry, Ideal for cutting and splitting hard stone, brick, concrete and more. Contains 1 flat head head chiselAnd a pair of gloves.
  • Sharpened and thickened flat end made of heat treated chrome-vanadium steel CRV steel(better than high carbon steel ). With high hardness, high strength, high durability, and resists rust and corrosion..
  • The soft handguard with ergonomic design, it can help protect from oversrtike and anti-slip, shock-absorb. The comfortable grip and big plate hand protection against glancing blows or missed hits..
  • Shock-absorb Soft Cover Handle: The rock chisel cover handle is soft and thick, they can absorb impact of hammer blow, you hardly notice the impact of the hammer on your hand, it makes you easy to do heavy duty works and get precise cut, and support your work smoothly..
  • Applications: The heavy-duty masonry chisel is widely used in sculpture, cutting, splitting, carving, demolishing brick, masonry, concrete, prying, and ripping nails and hardwood flooring etc..
Check Stock