Reviews Manifold Valves

SPW Hunter Premium Valve Manifold System PGV101GS with Flow Control - Heavy Duty Action Machining Parts - 3/4'' or 1'' Slip PGV-101 (4 Zone)

• Premium Manifold with Hunter 1" Slip Valves With Flow Control. DryConn waterproof connectors and a flashlight keychain included!.
• The Action inlet and all outlets fittings can accept 3/4" PVC pipe OR 1" PVC Coupling for 1" Pipe. Action Manifold parts are premium, rugged, heavy-duty, AND made in the USA!.
• Action Machining manifold systems are constructed out of thick schedule 80 PVC. O-Ring sealed for tool-less installation. 235 Max W.P. @ 73°. Buttress thread for a strong seal. Fully unionized..
• Never cut your system apart again to change a junk valve and easily expand your manifold system..
• Hunter PGV valve are high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure.

Weber 91538 2 Pack of Lighted Control Knobs for Some Summit Grills

• Weber 91538 2-pack main burner lighted control knobs for Summit 400/600 series grills manufactured 2012 and later. These fit the manifold that was....
• Includes: Two main burner control knobs (gray) for lighted knobs. Light is not included. Knob measures 2-3/8 inches in diameter. Fits 5/16 inch....
• Printed graphics (Off/Ignition/High To Low Temp) span all the way around the outside of the knob. Knobs feature a translucent body for emitting light,....
• If replacing knobs on a 2009-2011 model (prior to the redesign of the manifold with new valves), use Weber part #70867 instead, where the graphics....

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

• SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
• WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
• features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
• DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
• EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
• SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.

Shikha 5FT AC Diagnostic Manifold Freon Gauge Set for R410A R404A R22 R134A R12 R22 and R502 Refrigerant AC House Air Condition HVAC 60"

• This complete diagnostic R410A R404A R22 R134A R12 R22 and R502gauge set for the air condition systems features read easily with extra-large windows, display temperature in Celsius and give readings.
• Diaphragm valves with swivel seals for more positive seal and less wear, Pressure in PSI measurement.
• Durable rubber gauge cover for added support and protection, Comes with back hook for hanging the manifold gauge in place.
• The manifold gauge tool posses the durable metal casing, brass testing manifold body and high impact pop-in Lexan lens, this is the highly cost effective manifold kit..
• Made from solid brass + aluminum + PVC + plastic, so it can be much more durable and stand up to frequent use and accidental damage, suitable for professional auto mechanics.

InterDynamics Certified A/C Pro Car Air Conditioner Hose and Manifold Gauge Set, Reuseable Set Checks Low and High Side Pressures for R134-A Refrigerant, Includes Hoses

• CERTIFIFIED - Certified A/C Pro Automotive Air Conditioning R-134a Manifold Gauge & Hose Set is used to check both low and high side pressures while adding refrigerant..
• PROFESSIONAL GRADE - This professional grade kit features SAE approved 72 inch hoses (blue low-side, red high-side), and 60 inch yellow charging hose..
• CAN BE RECALIBRATED - The manifold has low and high pressure gauges that can be recalibrated..
• GUAGE & HOSE SET - Professional R-134a manifold gauge and hose set also comes in a blow molded plastic case..
• BUILT IN FEATURES - High and low pressure quick couplers with shutoff valves.

BOSCH (FIX 7803 Vacuum and Pressure Tester Kit, Black

• Great way to fine tune carburetion and timing for peak performance and maximum fuel economy.
• Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more.
• Use to find: intake manifold leaks, blown manifold and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles.
• Easy-to-read, 3-1/2 inch diameter face displays 0-30 inches vacuum (0-70cm) and 0-10 pounds (0-70 kPs) of pressure in both standard and metric scales.
• Includes gauge, hose, multiple adapters, and detailed usage and testing instructions in English, Spanish, and French. Note: fuel system functions are for carbureted engines only - not for use on fuel injected vehicles.

Loc-Line - 32094 Coolant Hose Component, Acetal Copolymer, In-Line Valve, 1/2\ Hose ID, 20 PSI (Pack of 2)

• Kit includes 2 piece 1/4" segments, 1 piece 1/4" MNPT valves, 1 piece 1" flare nozzle, 1 piece 1/4" round nozzle, 1 piece 1/8" round nozzle, 1 piece 1/16" round nozzle.
• Also includes 1 piece magnetic base manifold, 3 piece 1/4" plug, 1 piece 1/4" barb fitting.
• Magnetic Manifold allows distribution of coolant through 4 separate openings from one source.
• Magnet can mount on spindle or worktable for convenient access to the work piece.
• 1/4" ports accept any 1/4" standard fitting.

MP Care GDI Induction Cleaner, Intake Manifold, Air System, EGR, Valves, Turbo Cleaner

Everflo EF2200-BOX 12V Diaphragm Pump, Black, pump(s) (2.2 gpm)

• 12V diaphragm pump that handles up to 2.2GPM & 70 PSI.
• Corrosion resistant Viton valves and Santoprene diaphragm.
• Standard mounting pattern to fit most applications.
• Polypropylene pump manifold with 3/8" NPT ports.

Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT

• 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
• 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
• 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure....