Reviews Magnetic Seal Coupling

Replacement Luraco Magnetic Jet Head BF-004 Fits Pedicure |spa Massage Chair| Tubs Spa Chairs Accessories.

【Magnet Jet Head】Fit Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
【 Easy Clean and Service】The magnetic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact m....

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Coupling for connecting a hose to a pipe or fitting.
Hose barb on one end and female NST threads on the other.
Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
Nut for tightening threaded fitting with a wrench.

The Steelflex seal and gasket kit includes two elastomeric seal rings and the cover gaskets to seal lubricants in the coupling and keep contaminants out..
Five year warranty on Falk Steelflex Couplings when lubricated with Falk LTG Grease and used with Falk hubs, covers, and grids..
Size 1090T horizontally-split cover seal kit for T10 Series close-coupled double-flexing couplings..
When lubricated with Falk Long Term Grease (LTG) a Falk Steelflex Coupling does not require re-lubrication for five years..
Can be used on non Falk horizontal covers..

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..