Reviews Low Cost Magnetic Coupling

Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

[MATERIAL] - Universal joint shaft coupling is made of high quality iron, and then electroplated, much stronger, wearproof, durable to use.
[FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
[FUNCTION] - Shock mitigation, noise reduction.
when the rated torque is exceeded, the coupling can protect the safety of the linkage.
[APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.

【Magnet Jet Head】Fit Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
【 Easy Clean and Service】The magnetic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact m....

Elbow for connecting and disconnecting two tubes more easily than with a coupling.
Compression tube connections on all ends.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperature range of -65 to +250 degrees F.
Three piece construction - nut, sleeve and body.

Union for connecting and disconnecting two tubes more easily than with a coupling.
Compression tube connections on both ends.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperature range of -65 to +250 degrees F.
Three piece construction - nut, sleeve and body.

1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
For use with LP and natural gas, refrigeration, and hydraulic applications.
1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Union for connecting and disconnecting two tubes more easily than with a coupling.
Compression tube connections on both ends.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Three piece construction - nut, sleeve and body.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Union Straight for connecting and disconnecting two tubes more easily than with a coupling.
Compression tube connections on both ends.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperature range of -65 to +250 degrees F.
Three piece construction - nut, sleeve and body.

[Total Size] - Outer Diameter: 12mm / 0.47".
Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
[Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
[Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
[Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
[Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.

Coupling for connecting two hoses or pipes with the same diameter in a straight run.
Connects to a hose on one end and a GHT female connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
Hex nut for tightening threaded fitting with a wrench.