Reviews Machined Parts

Woodpeckers in-DEXABLE DOUBLE SQUARE - STANDARD - 6 INCH BLADE

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodworkers Edge Rule Set - Inch + Edge Rule Rack-It and 4 Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodpeckers Paolini Pocket Rules, 150mm Metric Aluminum Woodworking Ruler with Slide Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

  • Compatible with Phantom 3 Professional, Advanced, 4K.
  • Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
  • Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock

ACEgoes Woodworking Scriber T-Square Ruler 12in Architect Ruler for Carpenter Work Layout and Measuring Tools

  • Four Versions: 12",24",300mm,600mm. The 12" and 300mm size is ideal for work with solid lumber and furniture parts. The 24" and 600mm are intended for cabinetry work in the layout of sheet goods, large cabinet parts, entertainment centers and bookcases..
  • Precision: On the two outer edges of the blade, there are laser engraved lines every 1/32" , and the blade itself has precisely spaced 1.3MM holes drilled every 1/16". Stick a pencil in the hole, slide it along your workpiece and a perfectly spaced line accurately following the stock edge..
  • Humanized Design: The inch or metric scales are very clear and readable even for olders and poor lighting conditions. The blade edges are machined to a 45 degree bevel, The beveled design reduces parallax and increases measuring and marking accuracy..
  • Each T-Square consists of a precisely machined, laser engraved, aluminum blade perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • we prefer the 0.7 and 0.9mm mechanical pencil when drawing spaced lines, it is fine enough to do precision work and not easy to broke compared with 0.5mm, also easier than a wooden pencil..
Check Stock

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop, 2-Inch

  • Designed to fit rulers up to 2-1/4-inch wide.
  • Knob, screw & post machined from stainless steel.
  • Body parts are aluminum and anodized for decades of accurate performance.
  • Precision machined edges align easily with engraved scale graduations.
Check Stock

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

All Balls Racing 85-1006 Wheel Stud and Nut Kit

  • These are Forged CNC Machined and held to close tolerances.
  • package includes 4 NEW studs 10mm x 1.25mm x 37mm.
  • 150,000PSI Yield Strength Grade 8 Quality.
  • R.A.D Parts We Create Quality Parts to high standards and close specifications we are a team of precision C.N.C machinist and engineers who are masters at creating quality precision parts for the recreation and powersports market all products that we make are 100% U.S. Made.
Check Stock

Aluminum Billet Forward Controls Pegs For Harley Davidson Big Twin Softail Classic Custom Springer Standard Fatboy Heritage Deluxe 1984-1999/ Dyna Super Glide Low Glide Wide Glide/Electra Glide

  • 【FITMENT】✅Fit for Harley-Davidson Big Twin (master cylinder with 5/8" bore), such as Softail 1984-1999, Softail Custom, Classic, Heritage Softail, Fat boy,Deluxe,Deuce,Softail Springer.
  • 【UPGRADE NON-SLIP DESIGN】Upgrade the footpegs to non-slip design, light weight and has a longer life than old version.
  • 【HIGH QUALITY】CNC-machined from 6061-T6 billet aluminum, much more light weight. All parts are CNC machined or milled, sturdy and solid than some cheaply made steel casting parts.
  • 【FEATURE】Moves the controls 3"(7cm) forward, providing a comfortable riding position, making your driving comfortable.
  • 【KINDLY NOTE】USING YOUR EXISTING HARDWARD AND LINKAGES.
Check Stock

TARAZON Aluminum Forward Controls for Harley Shovelhead Rigid Big Twin Fatboy Heritage Softail Springer Custom Classic 1984-1999/ Dyna Super Glide Low Glide Wide Glide/Electra Glide

  • 【FITMENT】✅Fit for Harley-Davidson Big Twin (master cylinder with 5/8" bore), such as Softail 1984-1999, Softail Custom, Classic, Heritage Softail, Fat boy,Deluxe,Deuce,Softail Springer.
  • 【HIGH QUALITY】CNC-machined from 6061-T6 billet aluminum, much more light weight. All parts are CNC machined or milled, sturdy and solid than some cheaply made steel casting parts.
  • 【FEATURE】Moves the controls 3"(7cm) forward, providing a comfortable riding position, making your driving comfortable.
  • 【What You Get】Complete assemblies for both brake and shifter sides. Includes pegs, levers, linkage and hardware.
  • 【Satisfaction Guarantee】Please do not hesitate to contact us if you have any issues, we will provide friendly, easy-to-reach support for you. 1 Year Warranty.
Check Stock