Reviews M12 Tap Set
M12 x 1.25 Metric 12MM High Speed Steel LEFT HAND Plug Tap 4FL LH
- 12 mm x 1.25 mm 4FL high speed steel LEFT HAND high speed steel plug tap.
- Package Included: 1 piece of M12 x 1.25 Plug Tap.
Check Stock86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Sae And Metric Included: This tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check StockABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs
- [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
- [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
- [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
- Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
- [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
- Includes bottom recesses for organizing the coils in included plastic bags.
- [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
- Load the thread insert into installation tool.
Check StockToolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair
- 【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
- 1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
- 【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
- 【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
- 【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
- 【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....
Check StockEco-Baeerss Tap and Die Set Metri_c and Standard M12 X 1.25mm Tap Die Set Right Hand
- 【Model】M12 X 1.25mm tap and die set, pitch:1.25mm.
- 【Material】This threa_d tap is made of H_S_S 6542, which is stronger and more durable than ordinary taps.
- 【Scope of Application】 This product is suitable for stainless steel, iron, aluminum, copper, ordinary steel, wood and other materials. It can be used for hand-pulled or electric applications..
- 【Package Included】 1 x tap and 1 x die.
- 【After Sales Service】 Tap and dies support free returns and exchanges, our friendly customer service always supports our products and responds to all emails within 24 hours.
Check StockHappybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stockuxcell Thread Milling Threading Tap 1/4\-28 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade
- Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
- Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
- Standard thread distance design, clear and tidy, no burr..
- One set including 8 tools:M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
- These machine hand taps are used for machining nuts or other common thread on the machine..
Check StockHappybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check StockIrwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die
- Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
- SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
- Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
- Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check StockSunxenze 8pcs Metric Thread Machine Taps Set, Hand Screw Thread Plug Taps M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''
- Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
- Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
- Standard thread distance design, clear and tidy, no burr..
- One set including 8 tools:M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
- These machine hand taps are used for machining nuts or other common thread on the machine..
Check Stock