Reviews Long Valve Stems

ACCRETION TR415 Rubber Snap-in Tire Valve Stem for Tubeless 0.625 Inch 16 mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-415.
  • This valve stem is approx. 1.25 inch long.
  • Fits for most rime holes of 16 mm/ 0.625 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR415 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.625 inches(16 mm), Package Contents: 4 x TR415 Tire Valve Stems.
Check Stock

ACCRETION TR412 Rubber Snap-in Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-412.
  • This valve stem is approx. 0.866 inch long.
  • Fits for most rim holes of 11.5 mm/ 0.453 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Contents: 4 x TR412 Tire Valve Stems.
Check Stock

150 Pieces TR413 Rubber Snap in Tire Valve Stems Assortment Rubber Black Rubber Snap in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement

  • One Size Suits Most Cars: each valve stem for tubeless tires measures approx. 0.7 x 1.7 inches, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles.
  • Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear.
  • In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time.
  • Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to protect your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you.
  • Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members.
  • Please check the model and compatibility information carefully before ordering.
  • Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, c....
Check Stock

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

  • OFF-SET HEAD - Unlike other straight heads, Hromee valve stem remover and Installer is designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
  • PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
  • TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can....
Check Stock

CKAuto Valve Stem Puller/Installer with Rubber Boot

  • Durable steel construction with rubber overmold to protect wheels and rims from possible damage.
  • Off-set head designed to work with most aftermarket wheels and rims.
  • Head locks for easy installation and removal of valve stems.
  • 12.5-inches long to provide all the leverage necessary to remove stubborn valve stems.
  • Knurled handle provides a non-slip grip, this Valve Stem Removal/Installer Tool works on Dolly Tires, Lawn Mower Wheels, and Full Size Auto Rims.
Check Stock

EEZ RV Products EEZTire-TPMS Tire Pressure Monitoring System (TPMS) - Flow Through Sensor (1 ea)

  • Sensor Replaces Existing Valve Caps. Do not use flow-through sensors on rubber valve stems. Flow-through sensors are designed for deep rims and metal valve stems..
  • Long Battery Life, Replaceable Batteries.
  • Light Weight No Need For Rebalancing Tires.
Check Stock

100 Pieces Tire Valve Stems Assortment Rubber Black Rubber Snap-in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement (TR413 TR412 TR414)

  • What you will get: you will receive a total of 100 pieces of tubeless tire valve stems, sufficient quantity to meet your demands for daily use and replacement, you can store them for a long term use and please check the compatibility information carefully before placing an order.
  • Quality material: these black rubber snap-in valve stems are made of quality brass and ozone-resistant rubber, and have been tested by EPDM, ozone and leakage tests, and are equipped with high temperature brass valve cores, better performance, can serve you for a long time, economical and practical.
  • Easy to install: the standard length replacement tire valve stems are very easy to install and disassemble due to the snap-in design, you can easily install the valve stem with hands, time-saving and simple, providing you with much convenience when you are driving out.
  • When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process.
  • Practical function: the tire valve stem can keep your car tire well inflated at a steady air pressure level, thus to reduce the tire wear and keep the vehicle running smoothly, also the quality part you choose to replace, you can buy it with confidence.
Check Stock

Febrytold Tire Valve Stem Tool Remover & Installation 6 Pcs TR412 Snap-in Valve Stems with Valve Stem Cores 1 Pcs Single Head Tire Valve Core Remover Installer Tool 14 Pcs

  • 【Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve..
  • 【Installation】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems..
  • 【Function】Works with any wheel that uses a standard 0.453" valve stem stem..
  • 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks..
  • 【Package】1 Pcs Valve Stem Puller Installer Tool.
  • 6 Pcs TR412 Valve Stems with 6 Pcs Valve Stem Cores.
  • 1 Pcs Single Head Valve Core Tool (14 Pcs).
Check Stock

TR415 Rubber Snap-in Tire Valve Stem for 0.625 inch Rim Holes on Standard Vehicle Tires (50pcs/Box)

  • TR415 valve stems for tubeless 0.625” (11.5mm) diameter rim holes, these tire valves are 1.25" long (effetive length) and snap in easily to your tires., package contains the 50 pcs rubber snap-in valve stems..
  • TPMS TR415 Rubber Snap-in Valve Stem (50 pcs/ box).
  • Widely fit for car and motorcycle and electric vehicle tubeless tire etc.
  • Constructed of brass and ozone resistant EPDM rubber, better performance, durable, practical, long service life.
  • Meets SAE requirements, remains flexible in extreme cold weather.
Check Stock

Tire Supply TR-572 Brass Commercial 3-3/4 Valve Stem (10)

  • Snap-In Tubeless Valve Stem – Created as a Schrader replacement these black tire valve stems can be installed into any standard wheel seamlessly using and let you add a replacement tire valve core effortlessly with a core remover tool..
  • Leak-Resistant, Road-Ready Design – The heavy-duty rubber is weather resistant, strong enough to stand up to on- and off-road adventures and won’t leak air or retain moisture even during intense climate or environmental changes..
  • Rust-Resistant Brass Tip – Each TR-413 tire valve stem is fitted with a high-quality brass fitting that allows you to safely secure a tire valve stem cap. It also allows for better air flow when you’re filling up tires or checking tire pressure..
  • Optimal Stem Valve Length – Valve-Loc valve stems for tires are 1.25” in length and fit wheel hole diameters of 0.453” to ensure they can fit a wide range of common cars, trucks, SUVs, RVs, outdoor recreational vehicles and other standard-sized wheels..
  • Complete Black 4-Pack – Every order comes with four individual snap-in, tubeless tire valve stems to make it easier to swap out one at a time as needed, or to replace all stems on your vehicle at once. They’re also backed by our unbeatable service!.
Check Stock