Reviews Lapped Pipe End

Heavy Duty Pipe Clamp Jaws, 1 inch Heavy Duty Pipe Clamp Vise Fixture Set Wood Gluing Pipe Clamp Fixture Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly

  • GREAT CHOICE FOR WOODWORKING: This jig is perfect for woodworking work on cabinets and crates. Woodworking cast iron clamps with ergonomic handles make clamping easier and reduce hand fatigue.
  • HIGH QUALITY PERFORMANCE: The pipe clamps are made of solid cast steel, durable and sturdy. Keeps wood stable as you work, a great addition to any woodworking bench in your home or shop.
  • EASY TO USE: The woodworking jig is easy to handle. Just slide the tailgate over the pipe on the other end. Then put the coil spring stopper on the pipe thread at the end of the pipe to prevent the end from sliding out of the pipe during adjustment and away from the clamped workpiece.
  • HIGH QUALITY CAST STEEL MATERIAL: The pipe clamps are made of high hardness and high quality cast steel material, which is durable enough to meet the needs of your daily work. Wide range of uses, can be used as wooden clips, water pipe clips, plastic clips.
  • WIDE USE: Woodworking pipe clamps measure 1" and weigh 1760g/62.1oz (approx.). Often used in metalworking, woodworking and frame assembly, from DIY to industrial product....
Check Stock

rawr im 4 Year Old boy Shirt Roar 4th Birthday Shirt boy Four Dinosaur Tshirt Charcoal Blue 4T

  • Connects 4 in. S&D pipe to 4 in. S&D pipe & NDS parts that fit 4 in. S&D connections such as Spee-D, 5 in., & 8 in. Pro Series Channel Drain Outlets,....
  • Connects 4 in. Sewer & Drain (S&D) pipe to 4 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Connects 4 in. S&D pipe to select drainage products such as channel drain outlets and pop-up emitters.
  • Extend the pipeline by attaching 4 in. S&D pipe to one end of fitting and another 4 in. S&D pipe to the other end.
  • Comes with one PVC Coupling. Meets applicable ASTM standards. Hassle-free limited lifetime warranty guarantees the NDS product is free from....
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

END CLAMP / PANEL T CLAMP: 1-3/8' Chain Link Fence Clamp (for t-ing into a pipe (1-3/8' x 1-3/8'). 1 CLAMP

  • ✔ Pre-measure outside diameter of fence pipe prior to purchase to ensure You order correct size.
  • ✔ This T-clamp allows you to "Tee" into a piece of 1-3/8" chain link fence pipe with another 1-3/8" pipe..
  • Use for making extensions to an existing fence, connecting chain link fence panels, and more..
  • These end clamps are galvanized for long term exterior use. End/T clamps are easy to install..
  • Depending on what you are making you might want to purchase these in pairs one for each pipe end..
Check Stock

Pipe Swing Set Top Bar Frame - Straight V

  • The Top Pipe Center Frame can be used to extend a Stand Alone Pipe Swing Set.
  • Quick Way to extend a Pipe Swing Set. Hardware Included.
  • All you Need is Two Pipe End Frames , Four Swing Hangers, Four Metal Pipe Legs & One Top Metal Pipe for Complete Set.
  • Top Pipe Fits 2 3/8" to 2 1/2" Diameter Metal Pipe and Legs Fit 2" Diameter Metal Pipes...
  • Please take the product with you when purchasing the pipes to make sure it fits.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

NDS 9P06 Downspout Adapter Centered PVC IPS, 3-Inch by 4-Inch by 4-Inch

  • Connects 3 in. X 4 in. downspout to 4 in. S&D pipe.
  • Conveys water from downspout to drain pipe.
  • Connects 3 in. X 4 in. Downspout to 4 in. Sewer and Drain (S&D) pipe in non-pressurized drainage systems.
  • Attach 3 in. X 4 in. end to downspout and connect other end to 4 in. S&D pipe.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Downspout Adapter. Meets applicable ASTM standards. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects or we’ll replace it.
Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

Universal Stainless Steel Motorcycle Exhaust Muffler Noise Sound Eliminator 51mm Exhaust Pipe Baffle Removable Silencer

  • [Effective Noise Reduction]:The universal removable exhaust pipe muffler effectively reduce the deep sound while reducing motorcycle noise pollution..
  • [Removable] 51mm motorcycle exhaust pipe DB silencer, suitable for most motorcycles, installed at the rear of the exhaust pipe, is a detachable adjustable muffler for easy installation..
  • [Low-noise tailpipe]: The exhaust pipe can increase the exhaust pressure, reduce the tail-end noise, make the exhaust smoother, improve the power, and provide you with a good driving experience..
  • [Stainless Steel] The exhaust muffler is made of high quality stainless steel, whichis resistant to high temperature and rust and can be used for a long time..
  • [Safety And Environmental Protection] During the riding process, the muffler at the end of the exhaust pipe can clearly hear the whistle of the vehicles around the road, which is conducive to safe driving and reduce noise pollution..
Check Stock

ZEONHAK 4 Pack 3/4 Inches Pipe Clamp, Wood Gluing Pipe Clamp Set, Heavy Duty Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly, Red

  • MADE OF CAST IRON - This wood gluing pipe clamps are constructed of premium heavy duty cast iron, which is durable and sturdy. The surface of pipe clamp is finished by baking varnish, and the surface is smooth and shiny. The thread spindle is coated with black oxide..
  • ERGONOMIC DESIGN - Woodworking cast iron clamps with ergonomic handle makes clamping easier and reduces hand fatigue. The H-style base prevents the clamp from tipping out. Equipped with multiple steel sheets, the spring clamp clamping ability is stronger..
  • EASY TO USE - The wood gluing pipe clamp is easy to operate. Just slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped..
  • MULTI-PURPOSE - The quick release pipe clamp is multifunctional. It is often used in metalworking, woodworking and frame assembly, ranging from DIY to industrial production. Owning a pipe clamp can bring convenience and fun to your life..
  • 100% GUARANTEE - If our pipe clamp have any quality problems, you can request a full refund and return within 30 days after receiving the products. Quality and customer satisfaction are our top prioriti....
Check Stock