Reviews Ir Remote Eye

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Comes with adhesive backing sticks directly onto different devices.
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter).
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

Xbox One IR Extender Blaster Cable (3 Head, 10 Foot)

  • Our dual Heads design allows you to control multiple devices with only one IR output. Works with Xbox one, Apple TV, Many set top boxes, DVD, Blu-Ray and IR repeater systems - Check the technical details below to ensure it will work for you..
  • Unlike other older IR emitters found our IR Emitter Extender Cable can handle any IR code format in 38kHz and 56kHz. This means it is designed for today's newer Audio Video equipment.
  • These are Emitters, Not Receivers. We also sell receivers as well please put this number in the Amazon search bar and they will show up- B07V8BYR96.
  • Lead is terminated with a 3.5mm mono mini plug, Length of wire: 10 feet that can be separated by gently pulling the heads apart.
  • We have designed this unit without the annoying human eye visible blink so your not annoyed or distracted every time you push a button on any remote control..
Check Stock

CMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

YoLink Smart IR Remote/IR Blaster, 38KHz Frequency IR Learning Remote Controller for TVs, BluRay/DVD Player, Home Entertainment/Audio, LED Strips, Air Conditioners, Fans, YoLink Hub Required

  • IR Remote: Replace all your remotes with your smartphone, copy all frequency of 38k infrared remotes such as TV, Set-up Box, Air condition, DVD, audio and etc.
  • Note: YoLink Smart IR Remote can only work with 38k series remotes, please make sure your device is infrared type before purchasing..
  • Learning Remote: This is a learning remote.
  • you must teach the IR Remote to learn your IR remote's signals. You must have a functional IR remote if you want the IR Remote to replace it..
  • App Control: Control your infrared appliance remotely via YoLink App on your iOS or Android device.
  • Please note: YoLink Hub or SpeakerHub (sold separately) is required to use YoLink Smart IR Remote!.
  • Alexa Integration: Alexa can control the IR Remote! Create a Scene automation in the YoLink app, then create an Alexa routine that triggers the YoLink scene..
  • Doesn't Work without YoLink Hub: YoLink Hub is the only central controller for YoLink devices, and it connects YoLink devices to the internet and the cloud. Without YoLink Hub, this smart IR Remote does not work with the YoLink app and does not support 3rd-party integration with IFTTT.
  • YoLink Hub is not included, please search B07TQLKQLJ for the original Hub or search B09FSS95G9 for the new SpeakerHub (talking, audio hub).
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Triple 3 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Triple Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

Universal Simple Big Button Remote for Seniors Eldly, for IR Remote Control

  • Universal Simple Big Button Remote for Seniors Eldly, Only for IR Remote Control. Please Check Pictures to Confirm if Your Remote is IR Remote..
  • Only Can Learnt for Infrared (IR) remote control.
  • High-grade Remote Control: Stable Performance, Farther Transmitting Distance,. with the Same Function As Your Original Remote Control..
  • No Programming or Setting Up Required. Strongest Signal for Multi-angle Transmission, Control Distance over 12 Meters/40 Feet..
  • Response Time Less Than 0.2 Seconds, over 120,000 Clicks Approved Test Before the Delivery. Hassle-free Service: 365 Days Warranty. Please Don’t Hesitate to Contact Us if You Have Any Questions..
Check Stock

Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices.
  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
  • Note: plasma displays emit IR frequencies ....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock