Reviews Intake Manifolds - BestBuyersPro.com

Small Block Chevy Intake Manifold SBC Vortec Dual Plane 350 383 Intake Manifold 1996-UP Black

The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,500 rpm..
Engine Make/Size:Chevy Small Block (350,383 1997-up).

...ed Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.

Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
Molded to Factory Dimensions for a Perfect fit.
Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.

【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..

【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..

【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..

Intake gaskets with 1.23" wide x 1.99" tall port holes.
Carburetor Flange Type:4-Barrel Square Bore.
Aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs..
Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane.
Fitment:Fits 1957-86 SBC Chevy engine applications..

Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with LS1/LS2/LS6 cathedral port heads. Improves throttle response, torque and airflow..
Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow for tuning of power band..
The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency. The Lexar uses advanced polymer materials to cool intake temps for increase airflow and engine efficiency..
Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar features a sleek black finish, FAST logo with an option to add billet fuel rails. The Big Mouth Throttle Body features a slick natural billet aluminum finish..

Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with....
Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow....
The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency.....
Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar....

Ideal Applications Include Valve Covers, Intake Manifolds, Coolant Flanges, Oil Pans, Timing Covers, Heavy-Duty Truck and Fleet.
An additional application nozzle is included in every package for multiple use convenience..