Reviews 200ford F15intake Manifolds

JEM&JULES Carburetor Intake manifolds CX500 w/boots gaskets for Honda Carb Holders kit

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fitment: for 1978-1979 Honda CX500 1979-1982 Honda CX500C 1979-1981 Honda CX500D.
  • ★Intake boots become dried out and cracked over time causing air leaks which lead to lean running engines that prematurely fail. Replaces dried out, cracked intake manifolds that can cause engine failure. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips..
  • ★Please check pictures for more details, and check your part number and our fitment before placing an order.
  • ★1 set of 2 Brand new Aluminum carb manifolds rubber boots and orings (1 BID = SET OF 2 HOLDERS).
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

  • Brand New Holley Sniper EFI Stealth 4150 4 BBL Fuel Injection Master Kit,870 CFM, Gold, Compatible with 4150 Flange Style Manifolds (Holley Part #550-872K).
  • Specs: Brand: Holley Sniper EFI | CFM: 870 | Emission Code: 3 | Finish: Gold | Flange Style: 4150 | Fuel Pressure: 58.5 PSI | Height: 3.28 | Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female.
  • Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female O-Ring (AN 8) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
  • The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
  • Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel....
Check Stock

Small Block Chevy Intake Manifold SBC Vortec Dual Plane 350 383 Intake Manifold 1996-UP Black

  • The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,500 rpm..
  • Engine Make/Size:Chevy Small Block (350,383 1997-up).
Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

  • SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
  • WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
  • features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
  • DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
  • EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
  • SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • ...ed Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.
Check Stock

A-Premium Upper Intake Manifold with Gaskets Compatible with Ford Crown Victoria 96-00, Mustang 96-98, Thunderbird 96-97 & Lincoln Town Car 96-00 & Mercury Grand Marquis 96-00, Cougar 96-97, 4.6L V8

  • [Vehicle Fitment-1 ]: Compatible with Ford Crown Victoria 1996-2000 V8 4.6L (8th Vin Digit 6, 9, W).
  • Mustang 1996-1998 V8 4.6L (8th Vin Digit X).
  • Thunderbird 1996-1997 V8 4.6L (8th Vin Digit W).
  • [Vehicle Fitment-2]: Compatible with Lincoln Town Car 1996-2000 V8 4.6L (8th Vin Digit W).
  • Mercury Grand Marquis 1996-2000 V8 4.6L (8th Vin Digit 6, W).
  • Mercury Cougar 1996-1997 V8 4.6L (8th Vin Digit W).
  • [Reference Number]: F6SZ 9424-AA, F8AZ 9424-AAA, F8AZ 9424-BAA, F8AZ 9424-BC, F8AZ 9424-CA, F8AZ 9424-CB, 615-178.
  • [Specifications]: ①Manifold Height (in): 8.0 in ②Material: Plastic.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this Upper Intake Manifolds Kits is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Edelbrock 2176 Performer Aluminum Intake Manifold

  • Dual-plane, low-rise intake manifolds with a 180 degree firing order.
  • Boosts torque from off-idle to 5, 500 RPM.
  • Delivers improved throttle response over stock intakes.
Check Stock

COMP Cams CL12-234-2 Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

  • Strong torque thru low end and mid-range, good idle..
  • 212/218 Duration at .050". 110 Degree Lobe Separation Angle. 0.447"/0.454" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
  • More vacuum allows an increase in duration for improved performance and assists power brakes. Best performance with aftermarket intake manifolds, headers and lower gear ratios..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock