Reviews Inlet Tube

FREESEA Fish Tank Gravel Cleaner: Aquarium Siphon Vacuum Gravel Cleaner with Algae Scraper Water Flow Controller 5 in 1 Quick Water Changer for Fish Tank Gravel Sand Cleaning

  • ...D filter basket net which prevents aquarium gravel from jamming the pipe, not only does it separate and remove debris effectively, it also protects your young fish, grass and gravel from being sucked out..
  • ✅ [Easy to Installation & Use] - Aquarium vacuum gravel cleaner adopts humanized handheld design, connect the inlet and outlet pipe and put water inlet into a fish tank and the outlet into a bucket. Just a few gentle presses, the water will automatically flow out quickly. Allow one-hand operation, let your hands free. Note: The position of water outlet must be lower than the inlet (at least 50cm/16ft)..
  • ✅ [Include Everything You Need] - Fish tank vacuum cleaner includes: 2 x Extension inlet tube, adjustable extra long tube, suitable for all types of fish tanks.
  • 1 x Water flow clamp, easily adjust water flow.
  • 1 x Fixture clamp(Water pipe clamp), freely fix, free your hands..
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

Watts Premier WP116187 Top Mount Twist Air-Gap Monitored Faucet, Brushed Nickel

  • ...e air gap of the faucet, and 3/8 inch Black tube approximately 3 feet in length for the connection to the drain.
  • PLUMBING CODE: This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes. US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch)..
  • See attached installation manual in the Technical Details section.
Check Stock

Hand Operated Pail Pump, 4 gpm, 25-1/2" H

  • Price For: Each Suction Tube Outlet O.D. Size: 63/64″ Suction Tube Material: Polyethylene Max. Liquid Temp.: 130 Degrees F Suction Tube Outlet I.D. Size: 61/64″ Ounces per Stroke: 3 oz. Discharge Tubing Material: Polyethylene Outlet Size: 1″ Max. Pressure: 5 psi Piston Material: Polyethylene Metered: No Discharge Tube Outlet OD Size: 3/4″ Manufacturers Warranty Length: 1 yr..
  • Discharge Tube Length: 25-63/64″ Length: 2-1/2″ Inlet Size: 1″ Agency Compliance: FDA Compliant Discharge Size FPT (In.): 3/4 Max. Viscosity: 300 cps Hose Inside Dia.: 23/32″ Min. Length: 4″ Housing Material: Polyethylene Hose Length: 2 ft. For Use With: 5 gal., 6 gal., 7 gal. Pails, Food Products, Dyes, Additives, Colorings, Chemicals Compatible with Polyethylene Action Type: Siphon.
  • Hose Material: Polyethylene Suction Tube Length: 16-47/64″ Max. Head: 2 ft. Self-Priming: Yes Wetted Materials: Polyethylene Discharge Tube Outlet ID Size: 11/16″ Width: 5″ Suction Tube Type: Tube GPM: 4 Height: 25-1/2″ Item: Hand Operated Pail Pump Country of Origin (subject to change): South Korea.
Check Stock

ECOSI Aquarium Gravel Cleaner,Fish Tank Clear Pump,Aquarium Siphon for Sand Washing and Excrement-Absorbing Vacuum Quick Water Changer for Aquarium with a Pneumatic Button Adjustment Control

  • ...nction】 Water Changing:Built-in dual airbags, atmospheric cavity, good resilience, effortless operation.Sand Washing and Raking: Aquarium siphon with 3D Filter Basket Net, protect your love fish and small gravel from suck out of the aquarium.Dirt Suction:Gravel Vacuum for Aquarium equipped with a duckbill suction inlet accessory, and it is easy to suck the feces away.Fish Tank Glass Scraping:Clean up algae and stains on the fish tank.Sand Raking.
  • 【Easy to Use】Push the siphon switch several times, you can stop push after the inlet tube part is full of water and water continuously flows out from the outlet hose.Observe whether it will automatically.If not, please continue to operate it until the water flow out automatically.The small debris will be removed by the current.Please note that the water outlet must lower at least 20 inch than the inlet when using..
  • 【Wide Application】The kit is equipped with two 15.7-inch inlet tubes. The installation length can be selected according to the height of the fish tank. it is easy to install and operate. fitting different-sized fish tank..
  • 【Prevent blocking】Aquarium gravel filter cleaner can replace the water and keep water fresh,with filter basket in the tube, effectively avoiding blocking by grav....
Check Stock

Lukovee Aquarium Gravel Cleaner, Fish Tank Vacuum Cleaner Kit Tool With 2 Extendable Pipe, Glass Scraper, Water Flow Controller Clamp, (Aquarium Gravel Cleaner With Fish Net)

  • ...easily. It helps catch those crafty, quick fish and clean up debris in the tank. ②Filter basket net in the tube effectively avoids blocking by gravel and prevents smaller fish from being sucked into the apparatus..
  • ➤ 【5 IN 1 Multifunctional 】 --- The aquarium gravel cleaner is equipped with many accessories: inlet pipes, outlet hose, adjustable water flow controller clamp, fixture clamp, fish net and glass scraper. It could easily help you with aquarium water changing, algae scraping , sand washing and raking, excrement delivering without immersing your hands in the water and getting the ground wet..
  • ➤【 Fit For All Aquariums 】 --- With 2 inlet tubes ( each 15.75in / 40cm long ), the aquarium gravel cleaner kit can be connected by an orange pipe to use. It almost fits for all-size fish / plant / turtle aquarium tanks height less than 36in/92cm..
  • ➤ 【Simple Assembly, Easy Operation】 --- It’s easy to install and use. ①Connect the inlet pipe.②Insert the 6ft flexible outlet hose with water flow clamp on the other side and attach it on the bucket to prevent water from splashing. ③Spin on the orange connector to install the extension tube tightly. ④Keep pressing the air-pressing button until the water automatically flows out. ⑤Fi....
Check Stock

VINARGHYA Pharmaceuticals – Amrutdhara/Amritdhara/Herbal Amritdhara / अमृतधारा – 45gm

  • CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Applications.
  • Dual Pass Design with Inlet and Outlet on the Same Side..
  • Features with Two 1.2" Wide Mounting Brackets, For Easy of Installation..
  • Universal Fitment, Works For Many Applications..
  • Overall Size: 30x7x2.25 Inch Core Size: 26x6.5x2 Inch Inlet and Outlet Size: 3/4" Barbed Tube.
Check Stock

PULACO Aquarium Gravel Cleaner, New Quick Water Changer with Air-Pressing Button, Fish Tank Sand Cleaner Kit with Free Aquarium Brush

  • ★【Handheld Design】: Pulaco Gravel Cleaner is handheld design ,easy and handy, press the siphon button to start cleaning. Attention: Please ensure the outlet position lower than inlet position, otherwise water flow could be cut off due to pressure loss..
  • ★【Maximum Water Tank Depth】:3ft (92cm),the suction tube is 2 sections design. Single tube suitable for small fish tanks less than 1.7ft (52cm) depth.Double section, suitable for large fish tanks less than 3ft (92cm) depth..
  • ★【Instructions】:1.Prepare a transfer barrel, and use the securing clip to fasten the cleaner drain tubing.2 Press the air pressure button continuously until water comes up and drain out,the water inlet designed with a strainer,can prevent small fishes and aquatic plants being sucked in. 3.Use the glass scraper and brush to clean moss and accumulations on the tank glass..
  • ★【Aquarium Brush Gift】: The package included a dedicated tank brushes, help you clean the tank glass more efficiently..
  • ★【Package list】:1 x Cleaner handle, 1 x 6.5ft Drain tubing, 2 x 1.37ft Suction tubing,1 x suctio....
Check Stock

ABN Sandblaster Gun Kit – 7 Piece Pressure Washer Sandblasting Kit – Handheld Portable Sandblaster Kit

  • BUILT TO LAST: Built for durability, strength, and longevity, this portable sand blaster gun kit is made of premium materials that prevent rust and corrosion.
  • The chrome plated gun is durable and is compatible with the copper nozzle fittings and pick-up tube.
  • A small 1/4-inch NPT inlet connects to the heavy-duty rubber hose.
  • Perfect tool kit for cleaning automotive parts.
  • SPECIFICATIONS: The 5.5-inch (14 cm) sand blasting gun features a quick action 1.5-inch (3.8 cm) trigger and a comfortable 4-inch (10.2 cm) handle.
  • Operating air pressure reaches 60 to 120 PSI.
  • Copper tube is 11.5 inches (29.2 cm) and each sand blast nozzle measures at roughly 1.5 inches.
  • SAND BLAST KIT CONTENTS: Sand blast gun kit includes (1) sandblasting gun, (1) metal tube, (1) 6-foot (182.9 cm) black rubber hose, (1) hex key wrench, (1) inlet connector, and (3) sandblasting nozzle pieces.
  • Interchangeable sandblaster nozzle pieces allow you to work with various types of abrasives for almost any project.
Check Stock

Kerick Valve MA252 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/4\ Tube

  • Estimated rate of flow up to 1.5 gpm at 60 psi.
  • Tank mount with extended threads on inlet side of valve for mounting through tank wall.
  • Includes 1.5x4" float ball attached to adjustable valve shutoff arm.
  • 1/4" tube fitting inlet and free-flow outlet.
Check Stock